基于stm32f407芯片的串口数据接收代码
时间: 2023-07-16 08:14:19 浏览: 105
以下是基于stm32f407芯片的串口数据接收代码示例:
```c
#include "stm32f4xx.h"
#include <string.h>
#define UART_RX_BUF_SIZE 128
char uart_rx_buf[UART_RX_BUF_SIZE];
uint8_t uart_rx_index = 0;
void USART1_IRQHandler(void) {
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
char ch = USART_ReceiveData(USART1);
if (ch == '\r' || ch == '\n') {
uart_rx_buf[uart_rx_index] = '\0';
uart_rx_index = 0;
// 处理接收到的数据
// ...
} else {
uart_rx_buf[uart_rx_index++] = ch;
if (uart_rx_index >= UART_RX_BUF_SIZE) {
uart_rx_index = 0;
}
}
}
}
void USART1_Init(void) {
USART_InitTypeDef usart_init_struct;
NVIC_InitTypeDef nvic_init_struct;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
usart_init_struct.USART_BaudRate = 115200;
usart_init_struct.USART_WordLength = USART_WordLength_8b;
usart_init_struct.USART_StopBits = USART_StopBits_1;
usart_init_struct.USART_Parity = USART_Parity_No;
usart_init_struct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
usart_init_struct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &usart_init_struct);
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
nvic_init_struct.NVIC_IRQChannel = USART1_IRQn;
nvic_init_struct.NVIC_IRQChannelPreemptionPriority = 0;
nvic_init_struct.NVIC_IRQChannelSubPriority = 0;
nvic_init_struct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&nvic_init_struct);
USART_Cmd(USART1, ENABLE);
}
int main(void) {
USART1_Init();
while(1) {
// 主程序代码
// ...
}
}
```
上述代码中,串口数据接收中断服务函数 `USART1_IRQHandler()` 中,如果接收到的字符是换行符或回车符,说明一条完整的数据已经接收完成,将 `uart_rx_buf` 数组中的数据进行处理,并将 `uart_rx_index` 重置为 0。如果接收到的字符不是换行符或回车符,则将其添加到 `uart_rx_buf` 数组中,并将 `uart_rx_index` 加 1。当 `uart_rx_index` 大于等于 `UART_RX_BUF_SIZE` 时,将其重置为 0。串口的初始化和主程序代码中的部分省略,需要根据实际情况进行编写。