stm32F103TIM4ETR配置代码

以下是 STM32F103TIM4ETR 的配置代码：

#include "stm32f10x.h"

void TIM4_ETR_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
  TIM_ICInitTypeDef TIM_ICInitStructure;
  NVIC_InitTypeDef NVIC_InitStructure;

  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStructure);

  TIM_TimeBaseStructure.TIM_Period = xFFFF;
  TIM_TimeBaseStructure.TIM_Prescaler = ;
  TIM_TimeBaseStructure.TIM_ClockDivision = ;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);

  TIM_ICInitStructure.TIM_Channel = TIM_Channel_1;
  TIM_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising;
  TIM_ICInitStructure.TIM_ICSelection = TIM_ICSelection_TRC;
  TIM_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1;
  TIM_ICInitStructure.TIM_ICFilter = x;
  TIM_ICInit(TIM4, &TIM_ICInitStructure);

  TIM_SelectInputTrigger(TIM4, TIM_TS_ETRF);
  TIM_SelectSlaveMode(TIM4, TIM_SlaveMode_Reset);
  TIM_SelectMasterSlaveMode(TIM4, TIM_MasterSlaveMode_Enable);

  NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = ;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = ;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  TIM_ITConfig(TIM4, TIM_IT_CC1, ENABLE);
  TIM_Cmd(TIM4, ENABLE);
}

希望对你有所帮助。