STM32H743VIT6单片机 写RS485测试程序
时间: 2024-01-20 18:02:37 浏览: 38
以下是基于STM32CubeIDE的RS485测试程序。
首先,需要在STM32CubeMX中配置串口和GPIO,设置RS485的发送和接收使能脚,以及设置发送和接收缓冲区的大小。这里假设USART1作为RS485的串口,PA9作为RS485的发送使能脚,PA10作为RS485的接收使能脚,发送和接收缓冲区大小都为256字节。
接下来,在STM32CubeIDE中创建一个新的工程,选择适合你的开发板或芯片类型。在生成代码之后,打开main.c文件。
在main.c文件中,首先需要包含以下头文件:
```c
#include "main.h"
#include "usart.h"
```
在main函数中初始化串口和GPIO:
```c
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_USART1_UART_Init();
```
然后定义发送和接收缓冲区:
```c
uint8_t tx_buffer[256];
uint8_t rx_buffer[256];
```
接下来,实现一个函数来发送数据:
```c
void rs485_send(uint8_t *data, uint16_t len) {
// Set RS485 to transmit mode
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_SET);
// Send data
HAL_UART_Transmit(&huart1, data, len, HAL_MAX_DELAY);
// Wait for transmission to complete
HAL_UART_Transmit(&huart1, NULL, 0, HAL_MAX_DELAY);
// Set RS485 to receive mode
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_RESET);
}
```
该函数将RS485设置为发送模式,发送数据,等待发送完成,然后将RS485设置为接收模式。
接下来,实现一个函数来接收数据:
```c
void rs485_receive(uint8_t *data, uint16_t len) {
// Set RS485 to receive mode
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_RESET);
// Receive data
HAL_UART_Receive(&huart1, data, len, HAL_MAX_DELAY);
}
```
该函数将RS485设置为接收模式,接收数据,并将数据存储在缓冲区中。
最后,在main函数中使用这些函数来测试RS485:
```c
while (1) {
// Send test data
sprintf((char*)tx_buffer, "Hello, world!\r\n");
rs485_send(tx_buffer, strlen((char*)tx_buffer));
// Wait for a short time
HAL_Delay(100);
// Receive data
rs485_receive(rx_buffer, sizeof(rx_buffer));
// Print received data
printf("Received: %s", rx_buffer);
// Wait for a short time
HAL_Delay(1000);
}
```
该循环将发送一条消息,等待一段时间,然后接收数据并打印到终端。可以使用串口调试工具来查看打印的数据。
完整的代码如下:
```c
#include "main.h"
#include "usart.h"
#include <string.h>
#include <stdio.h>
uint8_t tx_buffer[256];
uint8_t rx_buffer[256];
void rs485_send(uint8_t *data, uint16_t len) {
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_SET);
HAL_UART_Transmit(&huart1, data, len, HAL_MAX_DELAY);
HAL_UART_Transmit(&huart1, NULL, 0, HAL_MAX_DELAY);
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_RESET);
}
void rs485_receive(uint8_t *data, uint16_t len) {
HAL_GPIO_WritePin(RS485_TX_EN_GPIO_Port, RS485_TX_EN_Pin, GPIO_PIN_RESET);
HAL_UART_Receive(&huart1, data, len, HAL_MAX_DELAY);
}
int main(void) {
HAL_Init();
MX_GPIO_Init();
MX_USART1_UART_Init();
while (1) {
// Send test data
sprintf((char*)tx_buffer, "Hello, world!\r\n");
rs485_send(tx_buffer, strlen((char*)tx_buffer));
HAL_Delay(100);
// Receive data
rs485_receive(rx_buffer, sizeof(rx_buffer));
// Print received data
printf("Received: %s", rx_buffer);
HAL_Delay(1000);
}
}
```
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)