解释"usb_pwr.h"
时间: 2023-05-26 13:07:18 浏览: 70
usb_pwr.h是一个C语言头文件,用于控制USB设备的供电。它包含了定义USB供电状态的常量和函数原型,可以使USB设备在不同的电源供应设置下工作。在此头文件中,还定义了PowerOn和PowerOff函数,可以开启和关闭USB设备的供电。这个头文件通常与USB设备驱动程序一起使用。
相关问题
stm32f103c8t6 usb驱动程序
对于STM32F103C8T6,其USB驱动程序可以使用ST提供的USB设备库来实现。具体步骤如下:
1. 在ST官网下载USB设备库,并解压到工程文件夹中。
2. 在工程中添加USB设备库的源文件,包括Core和Class两个文件夹下的所有.c和.h文件。
3. 在工程中添加USB设备库的头文件路径和宏定义,如下所示:
```
#include "stm32f10x.h"
#include "usb_conf.h"
#include "usb_lib.h"
#include "usb_pwr.h"
#define USB_DISCONNECT GPIOA
#define USB_DISCONNECT_PIN GPIO_Pin_12
#define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOA
```
4. 在工程中实现USB设备库提供的回调函数,包括USB中断处理函数、USB重置处理函数等。
5. 在main函数中初始化USB设备库,并启动USB设备模式。
写一个stm32usb串口程序
抱歉,我是AI语言模型,无法编写完整的程序。但是,我可以给你提供一些基本的步骤和代码示例,帮助你开始编写STM32USB串口程序。
步骤:
1. 配置USB相关的GPIO引脚和时钟
2. 初始化USB设备
3. 配置串口相关的GPIO引脚和时钟
4. 初始化串口
5. 接收和发送数据
代码示例:
#include "stm32f10x.h"
#include "usb_lib.h"
#include "usb_desc.h"
#include "usb_pwr.h"
#include "usart.h"
#define USB_DISCONNECT GPIOA
#define USB_DISCONNECT_PIN GPIO_Pin_11
#define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOA
void USB_Config(void)
{
Set_USBClock();
USB_Interrupts_Config();
USB_Init();
}
void Serial_Config(void)
{
USART_Config();
}
int main(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_DISCONNECT, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure);
USB_Config();
Serial_Config();
while (1)
{
// 接收数据
if (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == SET)
{
uint8_t data = USART_ReceiveData(USART1);
// 处理接收到的数据
}
// 发送数据
uint8_t data_to_send = 0x55;
USART_SendData(USART1, data_to_send);
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET) {}
}
}
这个示例程序假设你已经在另一个文件中实现了USB_Interrupts_Config()、Set_USBClock()和USART_Config()函数。
请注意,这只是一个示例程序,您需要根据自己的实际情况做必要的修改和调整。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)