给我一个可以实现的详细代码
时间: 2024-02-13 16:07:38 浏览: 37
好的,以下是一个可以实现的详细代码,基于STC89C52单片机:
```c
#include <reg52.h>
#include <intrins.h>
#define uchar unsigned char
#define uint unsigned int
// LCD1602相关函数
void LCD1602_WriteCommand(uchar command);
void LCD1602_WriteData(uchar data);
void LCD1602_Init();
void LCD1602_SetCursor(uchar x, uchar y);
void LCD1602_WriteString(const char *str);
void LCD1602_WriteChar(uchar c);
// I2C接口相关函数
void I2C_Start();
void I2C_Stop();
void I2C_WriteByte(uchar dat);
uchar I2C_ReadByte();
bit I2C_WaitAck();
void AT24C02_Init();
void AT24C02_Write(uchar addr, uchar *data, uchar len);
void AT24C02_Read(uchar addr, uchar *data, uchar len);
// 按键相关函数
uchar key_scan();
// 延时函数
void delay(uint xms);
void main() {
// 初始化LCD1602和AT24C02
LCD1602_Init();
AT24C02_Init();
// 定义按键次数计数器和按键信息数组
uchar key_count = 0;
uchar key_info[8];
while (1) {
// 检测按键是否按下
uchar key = key_scan();
if (key != 0) {
// 将按键信息写入数组中
key_info[key_count] = key;
key_count++;
}
// 如果按键次数达到8,将按键信息写入AT24c02中
if (key_count == 8) {
AT24C02_Write(0x00, key_info, 8);
key_count = 0;
}
// 读取最近8次按键信息并显示到LCD1602上
uchar read_data[8];
AT24C02_Read(0x00, read_data, 8);
LCD1602_SetCursor(0, 0);
for (uchar i = 0; i < 8; i++) {
LCD1602_WriteChar('K');
LCD1602_WriteChar(read_data[i] + '0');
LCD1602_WriteChar(' ');
}
// 延时一段时间,等待下一次检测
delay(100);
}
}
// LCD1602写命令函数
void LCD1602_WriteCommand(uchar command) {
_nop_();
P2 &= 0x0f;
P2 |= (command & 0xf0);
P0 &= ~(1 << 7);
P0 |= (1 << 5);
_nop_();
P0 &= ~(1 << 5);
_nop_();
P2 &= 0x0f;
P2 |= ((command << 4) & 0xf0);
P0 &= ~(1 << 7);
P0 |= (1 << 5);
_nop_();
P0 &= ~(1 << 5);
}
// LCD1602写数据函数
void LCD1602_WriteData(uchar data) {
_nop_();
P2 &= 0x0f;
P2 |= (data & 0xf0);
P0 |= (1 << 7);
P0 |= (1 << 5);
_nop_();
P0 &= ~(1 << 5);
_nop_();
P2 &= 0x0f;
P2 |= ((data << 4) & 0xf0);
P0 |= (1 << 7);
P0 |= (1 << 5);
_nop_();
P0 &= ~(1 << 5);
}
// LCD1602初始化函数
void LCD1602_Init() {
LCD1602_WriteCommand(0x02);
LCD1602_WriteCommand(0x28);
LCD1602_WriteCommand(0x0c);
LCD1602_WriteCommand(0x06);
LCD1602_WriteCommand(0x01);
}
// LCD1602设置光标位置函数
void LCD1602_SetCursor(uchar x, uchar y) {
uchar addr;
if (y == 0) {
addr = 0x80 + x;
} else {
addr = 0xc0 + x;
}
LCD1602_WriteCommand(addr);
}
// LCD1602写字符串函数
void LCD1602_WriteString(const char *str) {
while (*str) {
LCD1602_WriteData(*str++);
}
}
// LCD1602写字符函数
void LCD1602_WriteChar(uchar c) {
LCD1602_WriteData(c);
}
// I2C启动函数
void I2C_Start() {
SDA = 1;
SCL = 1;
_nop_();
SDA = 0;
_nop_();
SCL = 0;
}
// I2C停止函数
void I2C_Stop() {
SDA = 0;
SCL = 1;
_nop_();
SDA = 1;
_nop_();
}
// I2C写字节函数
void I2C_WriteByte(uchar dat) {
uchar i;
for (i = 0; i < 8; i++) {
SDA = (dat & 0x80) >> 7;
dat <<= 1;
_nop_();
SCL = 1;
_nop_();
SCL = 0;
}
SDA = 1;
_nop_();
SCL = 1;
_nop_();
SCL = 0;
}
// I2C读字节函数
uchar I2C_ReadByte() {
uchar dat = 0;
uchar i;
SDA = 1;
for (i = 0; i < 8; i++) {
dat <<= 1;
_nop_();
SCL = 1;
_nop_();
dat |= SDA;
SCL = 0;
}
return dat;
}
// I2C等待应答函数
bit I2C_WaitAck() {
bit ack;
SDA = 1;
_nop_();
SCL = 1;
_nop_();
ack = ~SDA;
SCL = 0;
_nop_();
return ack;
}
// AT24C02初始化函数
void AT24C02_Init() {
SDA = 1;
SCL = 1;
}
// AT24C02写函数
void AT24C02_Write(uchar addr, uchar *data, uchar len) {
I2C_Start();
I2C_WriteByte(0xa0);
I2C_WaitAck();
I2C_WriteByte(addr);
I2C_WaitAck();
for (uchar i = 0; i < len; i++) {
I2C_WriteByte(data[i]);
I2C_WaitAck();
}
I2C_Stop();
}
// AT24C02读函数
void AT24C02_Read(uchar addr, uchar *data, uchar len) {
I2C_Start();
I2C_WriteByte(0xa0);
I2C_WaitAck();
I2C_WriteByte(addr);
I2C_WaitAck();
I2C_Start();
I2C_WriteByte(0xa1);
I2C_WaitAck();
for (uchar i = 0; i < len; i++) {
data[i] = I2C_ReadByte();
if (i == len - 1) {
SDA = 1;
} else {
SDA = 0;
}
_nop_();
SCL = 1;
_nop_();
SCL = 0;
}
I2C_Stop();
}
// 按键扫描函数
uchar key_scan() {
uchar key_code = 0;
uchar key_value = 0xff;
uchar i;
P1 = 0xf0;
if (P1 != 0xf0) {
delay(10);
if (P1 != 0xf0) {
key_value = P1;
P1 = 0xf0;
for (i = 0; i < 4; i++) {
if ((key_value & (1 << i)) == 0) {
key_code = i + 1;
break;
}
}
}
}
return key_code;
}
// 延时函数
void delay(uint xms) {
uint i, j;
for (i = xms; i > 0; i--) {
for (j = 110; j > 0; j--);
}
}
```
在该代码中,使用了LCD1602和AT24C02的库函数,可以直接调用。另外,为了方便将按键信息转换为字符形式,使用了'0'~'9'的字符表示按键信息。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)