串口读int信息
时间: 2023-12-14 15:05:38 浏览: 27
在使用串口通信时,可以通过读取串口接收缓冲区中的数据,来获取从串口接收到的信息。读取串口接收缓冲区中的数据的方式,可以使用操作系统提供的串口读函数,或者使用第三方的串口读库。
具体地,读取串口接收缓冲区中的数据可以使用以下步骤:
1. 打开串口,配置串口参数,如波特率、数据位、停止位、校验位等。
2. 循环读取串口接收缓冲区中的数据,直到读取到指定的数据长度。
3. 将读取到的数据转换为整型数据,可以使用 C 语言提供的 `atoi` 函数或者 `sscanf` 函数等。
下面是一个示例代码,可供参考:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
#define BAUDRATE B9600
#define SERIAL_PORT "/dev/ttyUSB0"
int main() {
int fd;
struct termios options;
fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1) {
perror("open");
return -1;
}
fcntl(fd, F_SETFL, 0);
tcgetattr(fd, &options);
cfsetispeed(&options, BAUDRATE);
cfsetospeed(&options, BAUDRATE);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CRTSCTS;
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
options.c_iflag &= ~(IXON | IXOFF | IXANY);
options.c_oflag &= ~OPOST;
tcsetattr(fd, TCSANOW, &options);
while (1) {
char buffer[1024];
int n = read(fd, buffer, sizeof(buffer));
if (n > 0) {
buffer[n] = '\0';
int num = atoi(buffer);
printf("Received number: %d\n", num);
}
}
close(fd);
return 0;
}
```
需要注意的是,以上代码仅供参考,在实际使用时还需要根据具体需求进行修改。同时,还需要注意串口参数的配置,以及防止读取到不完整的数据等问题。