请问串口发送一条数据到STM32,这条数据是怎么存储的
时间: 2024-02-28 22:56:41 浏览: 24
在串口发送一条数据到STM32时,这条数据可以存储在单个字节(8位)或多个字节(16位、32位等)中,具体取决于所发送的数据类型和协议规定。
例如,如果要发送一个8位的无符号整数,可以将其存储在一个单独的字节中,如下所示:
```
uint8_t data = 0x55; // 要发送的数据
Serial.write(data); // 发送数据
```
如果要发送一个16位的有符号整数,则需要将其拆分成高8位和低8位,然后分别存储在两个字节中:
```
int16_t data = -1234; // 要发送的数据
uint8_t highByte = (data >> 8) & 0xFF; // 取高8位
uint8_t lowByte = data & 0xFF; // 取低8位
Serial.write(highByte); // 发送高8位
Serial.write(lowByte); // 发送低8位
```
在协议规定中,常见的数据存储格式包括大端序和小端序。在大端序中,高位字节存储在低地址,低位字节存储在高地址;在小端序中,高位字节存储在高地址,低位字节存储在低地址。在串口通信中,需要根据协议规定来确定数据的存储格式。
相关问题
stm32串口发送数据
在STM32中发送数据需要使用串口通信。以下是一个简单的示例代码,用于向串口发送数据:
```c
#include "stm32f10x.h"
#include <stdio.h>
void USART1_Init(void) {
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
USART_Cmd(USART1, ENABLE);
}
int USART1_SendChar(char ch) {
while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
USART_SendData(USART1, (uint8_t)ch);
return ch;
}
int USART1_SendString(char *str) {
while (*str) {
USART1_SendChar(*str++);
}
return 0;
}
int main(void) {
USART1_Init();
USART1_SendString("Hello, World!\r\n");
while (1) {
// Do nothing
}
}
```
这段代码中,首先需要初始化串口通信,然后可以使用 `USART1_SendChar` 和 `USART1_SendString` 函数向串口发送数据。在 `main` 函数中我们调用了 `USART1_SendString` 函数,向串口发送了一条字符串 "Hello, World!\r\n"。
用HAL库写一个stm32的串口发送数据的函数
当然可以!以下是使用HAL库在STM32上编写串口发送数据的函数示例:
```c
#include "stm32f4xx_hal.h"
void UART_SendData(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t size)
{
HAL_UART_Transmit(huart, pData, size, HAL_MAX_DELAY);
}
```
在这个例子中,我们使用了HAL库提供的`HAL_UART_Transmit`函数来发送数据。该函数的参数包括UART句柄(`huart`)、要发送的数据缓冲区指针(`pData`)以及数据大小(`size`)。`HAL_MAX_DELAY`表示在发送过程中不设置超时。
要使用该函数,你需要先实例化一个UART_HandleTypeDef结构体,并配置相应的UART外设。例如,你可以在主函数中添加以下代码:
```c
int main(void)
{
// 初始化HAL库
HAL_Init();
// 配置GPIO和UART外设
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_USART2_CLK_ENABLE();
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
UART_HandleTypeDef huart2;
huart2.Instance = USART2;
huart2.Init.BaudRate = 115200;
huart2.Init.WordLength = UART_WORDLENGTH_8B;
huart2.Init.StopBits = UART_STOPBITS_1;
huart2.Init.Parity = UART_PARITY_NONE;
huart2.Init.Mode = UART_MODE_TX_RX;
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
HAL_UART_Init(&huart2);
// 发送数据
uint8_t data[] = "Hello, STM32!";
UART_SendData(&huart2, data, sizeof(data) - 1);
while (1)
{
// 主循环
}
}
```
在上面的示例中,我们使用了USART2作为UART外设,并将PA2和PA3引脚配置为复用功能以与UART通信。然后,通过调用`UART_SendData`函数发送了一条字符串数据。
请注意,以上代码仅为示例,具体的配置和使用方法可能因所使用的STM32型号和开发环境而有所不同。因此,在实际应用中,你可能需要根据自己的需求进行适当修改。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)