Ws2811灯带用C语言简单控制
时间: 2024-05-09 19:21:01 浏览: 7
由于WS2811灯带需要通过数据传输来控制每个LED的亮度和颜色,因此需要使用特定的库来编写程序。在C语言中,可以使用如下的代码来控制WS2811灯带:
1. 定义灯带参数
在程序开头,需要定义灯带的参数,包括灯带接口类型、灯带数量等。例如:
```
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <wiringPi.h>
#include <wiringPiSPI.h>
#include <errno.h>
#define SPI_SPEED 8000000
#define LED_COUNT 60
#define LED_TYPE WS2811_STRIP
typedef struct {
uint8_t red;
uint8_t green;
uint8_t blue;
} color_t;
```
其中,`LED_COUNT`表示灯带上LED的数量,`LED_TYPE`表示灯带的接口类型,`color_t`表示每个LED的颜色。
2. 初始化灯带
在程序中需要初始化灯带,包括SPI接口和灯带。例如:
```
int init_led() {
if (wiringPiSPISetup(0, SPI_SPEED) < 0) {
fprintf(stderr, "Failed to initialize SPI: %s\n", strerror(errno));
return -1;
}
if (ws2811_init(&ledstring) != WS2811_SUCCESS) {
fprintf(stderr, "Failed to initialize LED string: %s\n", ws2811_get_return_t_str(ws2811_init(&ledstring)));
return -1;
}
return 0;
}
```
其中,`wiringPiSPISetup()`函数用于初始化SPI接口,`ws2811_init()`函数用于初始化灯带。
3. 控制灯带颜色
在程序中,可以使用如下的代码来控制灯带的颜色:
```
color_t color = {255, 0, 0}; // 红色
ws2811_led_t leds[LED_COUNT];
for (int i = 0; i < LED_COUNT; i++) {
leds[i] = (color.green << 16) | (color.red << 8) | color.blue;
}
ws2811_render(&ledstring, leds, LED_COUNT);
```
其中,`color`表示LED的颜色,`leds`表示每个LED的颜色值,`ws2811_render()`函数用于将颜色数据发送到灯带上。
完整的程序如下:
```
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <wiringPi.h>
#include <wiringPiSPI.h>
#include <errno.h>
#include <ws2811.h>
#define SPI_SPEED 8000000
#define LED_COUNT 60
#define LED_TYPE WS2811_STRIP
typedef struct {
uint8_t red;
uint8_t green;
uint8_t blue;
} color_t;
ws2811_t ledstring = {
.freq = WS2811_TARGET_FREQ,
.dmanum = 5,
.channel = {
[0] = {
.gpionum = 18,
.count = LED_COUNT,
.invert = 0,
.brightness = 255,
.strip_type = LED_TYPE,
},
[1] = {
.gpionum = 0,
.count = 0,
.invert = 0,
.brightness = 0,
},
},
};
int init_led() {
if (wiringPiSPISetup(0, SPI_SPEED) < 0) {
fprintf(stderr, "Failed to initialize SPI: %s\n", strerror(errno));
return -1;
}
if (ws2811_init(&ledstring) != WS2811_SUCCESS) {
fprintf(stderr, "Failed to initialize LED string: %s\n", ws2811_get_return_t_str(ws2811_init(&ledstring)));
return -1;
}
return 0;
}
int main() {
if (wiringPiSetupGpio() < 0) {
fprintf(stderr, "Failed to initialize GPIO: %s\n", strerror(errno));
return -1;
}
if (init_led() < 0) {
return -1;
}
color_t color = {255, 0, 0}; // 红色
ws2811_led_t leds[LED_COUNT];
for (int i = 0; i < LED_COUNT; i++) {
leds[i] = (color.green << 16) | (color.red << 8) | color.blue;
}
ws2811_render(&ledstring, leds, LED_COUNT);
return 0;
}
```
程序中使用了`ws2811.h`库来控制WS2811灯带,需要在编译时链接该库。例如,使用如下的命令编译程序:
```
gcc -o main main.c -lwiringPi -lws2811
```