获取char* data_text的长度
时间: 2023-12-21 12:04:26 浏览: 23
要获取char*类型的字符串的长度,可以使用C++标准库中的strlen函数。但需要注意的是,该函数要求传入的字符指针必须指向以null字符结尾的字符串,否则将会导致不可预知的错误。
例如,假设有如下的char*类型的字符串:
```c++
char* data_text = "Hello, world!";
```
则可以使用strlen函数获取其长度:
```c++
#include <cstring>
int len = strlen(data_text); // len的值为13
```
需要注意的是,如果char*类型的字符串并不是以null字符结尾的,或者指针为空,使用strlen函数将导致不可预知的错误。因此,在使用strlen函数前,需要确保输入的参数指针有效,并且指向的字符串以null字符结尾。
相关问题
指出以下代码错误并修改。input_texts = [] target_texts = [] input_characters = set() target_characters = set() with open(data_path, 'r', encoding='utf-8') as f: lines = f.read().split('\n') for line in lines[: min(num_samples, len(lines) - 1)]: try: input_text,target_text = line.split('\t') target_text = '\t' + target_text + '\n' input_texts.append(input_text) target_texts.append(target_text) for char in input_text.strip(): if char not in input_characters: input_characters.add(char) for char in target_text.strip(): if char not in target_characters: target_characters.add(char) except ValueError: pass input_characters = sorted(list(input_characters)) target_characters = sorted(list(target_characters)) num_encoder_tokens = len(input_characters) num_decoder_tokens = len(target_characters) max_encoder_seq_length = max([len(txt) for txt in input_texts]) max_decoder_seq_length = max([len(txt) for txt in target_texts])
这段代码没有明显的语法错误,但是存在逻辑错误。如果数据集中有空行,代码可能会出错。此外,如果数据集中的行数小于 `num_samples`,代码也可能会出错。因此,我们应该在读取数据之前,先添加一个判断语句,确保数据集中的行数不小于 `num_samples`。
另外,在计算 `max_encoder_seq_length` 和 `max_decoder_seq_length` 时,应该使用 `strip()` 函数去掉每个行末尾的空格和换行符。
有关代码的修改建议如下:
```python
input_texts = []
target_texts = []
input_characters = set()
target_characters = set()
with open(data_path, 'r', encoding='utf-8') as f:
lines = f.read().split('\n')
if len(lines) < num_samples:
num_samples = len(lines) - 1
for line in lines[:num_samples]:
try:
input_text, target_text = line.split('\t')
target_text = '\t' + target_text + '\n'
input_texts.append(input_text)
target_texts.append(target_text)
for char in input_text.strip():
input_characters.add(char)
for char in target_text.strip():
target_characters.add(char)
except ValueError:
pass
input_characters = sorted(list(input_characters))
target_characters = sorted(list(target_characters))
num_encoder_tokens = len(input_characters)
num_decoder_tokens = len(target_characters)
max_encoder_seq_length = max([len(txt.strip()) for txt in input_texts])
max_decoder_seq_length = max([len(txt.strip()) for txt in target_texts])
```
修改后的代码中,我们添加了一个判断语句,确保读取的行数不会超过数据集的行数。同时,在计算序列的最大长度时,我们使用了 `strip()` 函数去掉每个行末尾的空格和换行符。
void library::modify(library &L, char* arr, char* arr1, char* arr2, char* arr3, char* arr4, char* arr5, char* arr6, char* arr7) { char a[100], b[100]; strcpy(a, arr); library *p; int count = 0, i = 0, j = 0; while (*arr != '\0') { count++; arr++; } p = L.next; while (p) { strcpy(b, p->data.name); i = 0, j = 0; while (a[i] == b[j] && a[i] != '\0' && b[j] != '\0') { i++; j++; } if (i == count) { strcpy(p->data.name, arr1); strcpy(p->data.num, arr2); strcpy(p->data.tel, arr3); strcpy(p->data.cla, arr4); strcpy(p->data.name1, arr5); strcpy(p->data.time, arr6); strcpy(p->data.adress, arr7); cout << "修改成功" << endl; ofstream ofs; ofs.open("text.txt", ios::out); library *S; S = L.next; while (S) { ofs << S->data.name << " " << S->data.num << " " << S->data.tel << " " << S->data.cla << " " << S->data.name1 << " " << S->data.time << " " << S->data.adress << " " << endl; S = S->next; } ofs.close(); return; } p = p->next; } cout<<"查无此书,修改失败"<<endl; }为我详细解释每段代码
这段代码是一个图书管理系统中的修改函数,用于修改图书信息。下面是代码的详细解释:
```c++
void library::modify(library &L, char* arr, char* arr1, char* arr2, char* arr3, char* arr4, char* arr5, char* arr6, char* arr7)
```
这是修改函数的声明,其中library是一个类名,表示图书库,后面的参数分别是要修改的字段,比如书名、编号、电话、分类、作者、出版时间、地址等。
```c++
char a[100], b[100];
strcpy(a, arr);
library *p;
int count = 0, i = 0, j = 0;
while (*arr != '\0')
{
count++;
arr++;
}
```
这里定义了两个字符数组a和b,用于保存要查找的书名和图书库中已有的书名。然后使用strcpy函数将要查找的书名复制到a中。接着定义了指针p,用于遍历图书库中的每一个图书。count记录了要查找的书名的长度,i和j是用于比较两个字符串的指针。
```c++
p = L.next;
while (p)
{
strcpy(b, p->data.name);
i = 0, j = 0;
while (a[i] == b[j] && a[i] != '\0' && b[j] != '\0')
{
i++;
j++;
}
```
这里将指针p指向图书库的头节点,然后使用strcpy函数将p指向的图书名复制到b中。接着使用while循环比较a和b两个字符串,如果相等就继续比较下一个字符,直到有一个字符串到达了结尾或两个字符串不相等为止。
```c++
if (i == count)
{
strcpy(p->data.name, arr1);
strcpy(p->data.num, arr2);
strcpy(p->data.tel, arr3);
strcpy(p->data.cla, arr4);
strcpy(p->data.name1, arr5);
strcpy(p->data.time, arr6);
strcpy(p->data.adress, arr7);
cout << "修改成功" << endl;
ofstream ofs;
ofs.open("text.txt", ios::out);
library *S;
S = L.next;
while (S)
{
ofs << S->data.name << " " << S->data.num << " " << S->data.tel << " " << S->data.cla << " " << S->data.name1 << " " << S->data.time << " " << S->data.adress << " " << endl;
S = S->next;
}
ofs.close();
return;
}
```
如果a和b两个字符串相等,说明找到了要修改的图书。这里将新的图书信息复制到p指向的图书节点中,然后输出修改成功的提示信息。接着打开文件text.txt,将图书库中的所有图书信息重新写入文件中。最后使用return语句退出函数。
```c++
p = p->next;
}
cout<<"查无此书,修改失败"<<endl;
```
如果遍历完整个图书库还没有找到要修改的图书,就说明没有这本书,输出查无此书的提示信息。