stm32单片机通信协议程序
时间: 2023-07-16 22:13:13 浏览: 83
STM32 单片机可以使用多种通信协议,包括UART、SPI、I2C等。以下是一个使用UART通信协议的示例程序:
```c
#include "stm32f10x.h"
#include <stdio.h>
#define USART1_TX_PIN GPIO_Pin_9
#define USART1_RX_PIN GPIO_Pin_10
#define USART1_GPIO GPIOA
USART_InitTypeDef USART_InitStructure;
void USART1_Configuration(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = USART1_TX_PIN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(USART1_GPIO, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = USART1_RX_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(USART1_GPIO, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
USART_Cmd(USART1, ENABLE);
}
void USART1_SendChar(char ch)
{
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
USART_SendData(USART1, ch);
}
void USART1_SendString(char* str)
{
while (*str)
{
USART1_SendChar(*str++);
}
}
int main(void)
{
USART1_Configuration();
while (1)
{
USART1_SendString("Hello, world!\n");
Delay(500000);
}
}
```
在这个程序中,我们使用USART1进行通信,波特率为9600,使用PA9和PA10引脚作为发送和接收引脚。在主函数中,我们不断发送字符串“Hello, world!”,并延迟一段时间后再次发送。你可以根据自己的需要修改程序中的内容。