用debug实现stm32GPIOled两次点亮的时间间隔为1秒
时间: 2024-05-05 22:17:20 浏览: 16
下面是使用Debug实现STM32 GPIO led两次点亮间隔1秒的示例代码:
```c
#include "stm32f4xx.h"
void Delay(uint32_t nCount);
int main(void)
{
/* Enable GPIOD clock */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
/* Configure PD12, PD13, PD14 and PD15 in output pushpull mode */
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOD, &GPIO_InitStructure);
while (1)
{
/* Turn on all LEDs */
GPIO_SetBits(GPIOD, GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15);
/* Delay for 1 second */
Delay(1000000);
/* Turn off all LEDs */
GPIO_ResetBits(GPIOD, GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15);
/* Delay for 1 second */
Delay(1000000);
}
}
void Delay(uint32_t nCount)
{
volatile uint32_t i;
for (i = 0; i < nCount; ++i)
{
/* Do nothing */
}
}
```
在Debug模式下,可以使用单步执行功能来逐行执行代码,并查看每个变量的值和每个输出的状态。在此示例中,使用Delay函数来生成1秒的延迟。可以在Delay函数中设置断点,然后单步执行程序,以观察延迟时间是否正确。
此外,可以使用Watch窗口来监视GPIO端口的状态,并在代码中设置断点来确保LED的状态正确。