irq_of_parse_and_map
时间: 2023-08-12 15:09:09 浏览: 125
`irq_of_parse_and_map()` 是Linux内核中的一个函数,它的作用是将一个设备特定的中断号转换为全局唯一的中断号。
在Linux内核中,不同的硬件设备可能会使用不同的中断号。因此,为了确保内核中的中断控制器能够正确地处理所有的中断请求,需要将设备特定的中断号转换为全局唯一的中断号。
`irq_of_parse_and_map()` 函数会根据设备树中的中断描述符来查找全局唯一的中断号,并将其映射到对应的中断向量。这个函数通常在设备驱动程序的 probe 函数中被调用,以便在设备被探测到时分配中断资源。
需要注意的是,`irq_of_parse_and_map()` 函数只能用于设备树中定义了中断描述符的设备。如果设备没有在设备树中定义中断描述符,那么就需要手动分配中断资源并使用其他函数进行初始化。
相关问题
irq_of_parse_and_map函数
irq_of_parse_and_map函数是用来解析并映射中断的函数,用于在设备树中查找中断号和中断触发方式,然后将其映射到irq编号,并且将对应的中断控制器和设备进行连接。该函数通常在驱动程序的probe函数中调用,以便为设备启用中断。
unsigned int irq_of_parse_and_map(struct device_node *dev, int index) 函数返回值什么
The function `irq_of_parse_and_map()` returns the mapped interrupt number for a given interrupt specifier in the device tree.
The returned value is of type `unsigned int`, which represents the mapped interrupt number that can be used to request and manage interrupts in the system. If the function fails to parse or map the interrupt, it returns an error code, usually a negative integer.
Here is an example usage of `irq_of_parse_and_map()` function:
```
int irq_num = irq_of_parse_and_map(dev, index);
if (irq_num < 0) {
// error handling
}
else {
// interrupt handling
}
```
In this example, the function `irq_of_parse_and_map()` is used to parse and map the interrupt for a given device node `dev` and interrupt index `index`. The mapped interrupt number is stored in the variable `irq_num`, which is then used for interrupt handling. If the function fails to parse or map the interrupt, it returns a negative error code.