c++如何获取串口来数据长度
时间: 2024-03-11 16:47:41 浏览: 29
在 C++ 中获取串口来的数据长度可以通过以下步骤实现:
1. 打开串口并设置参数;
2. 使用串口读取函数读取数据,并将数据存储到缓冲区中;
3. 使用缓冲区中的数据长度作为接收到的数据长度。
具体代码实现如下:
```
// 打开串口并设置参数
int fd = open("/dev/ttyS0", O_RDONLY | O_NOCTTY | O_NDELAY);
if (fd < 0) {
perror("Open Serial Port Failed!");
return -1;
}
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~(ICANON | ECHO | ECHOE | ISIG);
options.c_iflag &= ~(IXON | IXOFF | IXANY);
options.c_iflag &= ~(INLCR | IGNCR | ICRNL);
options.c_oflag &= ~OPOST;
tcsetattr(fd, TCSANOW, &options);
// 读取串口数据并获取数据长度
char buf[1024];
int len = read(fd, buf, sizeof(buf));
if (len < 0) {
perror("Read Serial Port Failed!");
return -1;
}
printf("Received Data Length: %d\n", len);
// 关闭串口
close(fd);
```
注意:以上代码仅供参考,具体实现还需要根据实际情况进行调整。