在Linux中以阻塞的方式打开串口,并设置为 5s 的超时返回,然后从串口中读取数据
时间: 2024-02-16 16:03:01 浏览: 35
好的,我可以回答你的问题。在Linux中以阻塞的方式打开串口,并设置为 5s 的超时返回的代码如下:
```c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
#include <string.h>
#include <errno.h>
int main()
{
const char* serial_port = "/dev/ttyS0"; // 串口设备文件
int fd = open(serial_port, O_RDWR | O_NOCTTY | O_NDELAY); // 以非阻塞方式打开串口
if (fd == -1)
{
perror("open serial port error");
exit(EXIT_FAILURE);
}
// 设置串口属性
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600); // 设置波特率为 9600
cfsetospeed(&options, B9600);
options.c_cflag |= CLOCAL | CREAD;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~PARENB;
tcsetattr(fd, TCSANOW, &options);
// 设置超时时间
struct timeval timeout;
timeout.tv_sec = 5;
timeout.tv_usec = 0;
if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, (char *)&timeout, sizeof(timeout)) < 0)
{
perror("setsockopt failed");
exit(EXIT_FAILURE);
}
// 以阻塞方式读取数据
char buf[1024];
int n = read(fd, buf, sizeof(buf));
if (n == -1 && errno == EAGAIN)
{
printf("read timeout\n");
}
else if (n > 0)
{
buf[n] = '\0';
printf("read data: %s\n", buf);
}
close(fd);
return 0;
}
```
这个代码使用了 POSIX 串口编程接口,通过 `open` 函数打开串口设备文件,然后使用 `tcgetattr` 和 `tcsetattr` 函数设置串口属性,其中包括波特率、数据位、停止位、奇偶校验等参数。接着使用 `setsockopt` 函数设置超时时间,最后使用 `read` 函数以阻塞方式读取数据,如果超时则返回错误码 `EAGAIN`。