I2C传输数据返回状态I2C bus is busy, cannot start transfer是什么原因
时间: 2024-04-25 22:26:56 浏览: 13
I2C传输数据返回状态"I2C bus is busy, cannot start transfer" 表示I2C总线正在被占用,无法启动传输。这通常是由于以下原因之一导致的:
1. 在进行I2C传输之前,另一个设备已经占用了I2C总线。
2. I2C设备处理器正在执行某些操作并正在使用I2C总线。
3. I2C设备处理器已崩溃或处于死循环状态,导致I2C总线一直被占用。
解决此问题的方法是检查I2C总线上的其他设备是否正在使用总线,或者重启I2C设备以清除任何潜在的死锁或卡死情况。
相关问题
i2c 传输数据函数
在 C 语言中,i2c 传输数据的函数通常使用标准的 Linux i2c-dev 驱动程序库来实现。下面是一个简单的示例代码:
```c
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <linux/i2c-dev.h>
#define I2C_SLAVE_ADDRESS 0x12
int main()
{
int file;
char filename[20];
int addr = I2C_SLAVE_ADDRESS;
sprintf(filename,"/dev/i2c-1");
if ((file = open(filename,O_RDWR)) < 0) {
perror("Failed to open the i2c bus");
return 1;
}
if (ioctl(file,I2C_SLAVE,addr) < 0) {
perror("Failed to acquire bus access and/or talk to slave");
return 1;
}
// 发送数据
char buffer[] = {0x01, 0x02, 0x03};
if (write(file, buffer, sizeof(buffer)) != sizeof(buffer)) {
perror("Failed to write to the i2c bus");
return 1;
}
// 接收数据
char read_buffer[10];
if (read(file, read_buffer, 10) < 0) {
perror("Failed to read from the i2c bus");
return 1;
}
// 关闭文件
close(file);
return 0;
}
```
这段代码打开了 i2c-1 总线,并将设备地址设置为 0x12,然后发送了一个长度为 3 的数据包(0x01、0x02 和 0x03),并从设备读取了最多 10 个字节的响应数据。这里的 read 和 write 函数都是标准的系统调用,用于读写文件描述符。你可以根据自己的需要修改代码,以适应你的具体应用场景。
i2c_transfer
`i2c_transfer`是Linux内核提供的函数,用于在I2C总线上进行数据传输。该函数可以同时处理多个I2C消息,包括读取和写入操作。
函数原型如下:
```c
int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
```
参数说明:
- `adap`:指向要进行传输的I2C适配器(总线)的指针。
- `msgs`:指向I2C消息数组的指针,每个消息包含了要传输的数据、设备地址和标志位等信息。
- `num`:要传输的消息数量。
返回值为传输的消息数量,如果返回值小于`num`,则表示传输过程中发生了错误。
下面是一个简单的示例代码,演示如何使用`i2c_transfer`函数进行I2C数据传输:
```c
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <fcntl.h>
#include <unistd.h>
int main()
{
int fd = open("/dev/i2c-0", O_RDWR);
if (fd < 0) {
perror("Failed to open I2C bus");
return 1;
}
struct i2c_msg msgs[2];
unsigned char buf[2];
int ret;
// 设置从设备地址
msgs[0].addr = 0x50;
msgs[0].flags = 0;
msgs[0].buf = buf;
msgs[0].len = 1;
// 读取数据
buf[0] = 0x00;
msgs[1].addr = 0x50;
msgs[1].flags = I2C_M_RD;
msgs[1].buf = buf;
msgs[1].len = 4;
ret = i2c_transfer(fd, msgs, 2);
if (ret < 0) {
perror("Failed to transfer data");
close(fd);
return 1;
}
// 处理读取的数据
// ...
close(fd);
return 0;
}
```
上述示例代码中,首先打开I2C总线设备文件`/dev/i2c-0`,然后使用`i2c_msg`结构创建一个I2C消息数组。在示例中,我们设置了两个消息:第一个消息用于写入要读取的寄存器地址,第二个消息用于读取4个字节的数据。最后,我们使用`i2c_transfer`函数进行数据传输,返回值表示成功传输的消息数量。
需要注意的是,上述代码适用于在用户空间中进行I2C数据传输,如果需要在内核驱动中使用`i2c_transfer`函数,可以参考内核源代码中相关的I2C驱动实现。