利用c编写STM32调用SPI接口的代码
时间: 2024-04-09 16:33:51 浏览: 15
下面是一个使用C语言编写的STM32调用SPI接口的示例代码:
```c
#include "stm32f4xx.h"
void SPI_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
SPI_InitTypeDef SPI_InitStruct;
// 使能SPI时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
// 配置SCK、MISO和MOSI引脚
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 配置SPI引脚复用
GPIO_PinAFConfig(GPIOA, GPIO_PinSource5, GPIO_AF_SPI1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource6, GPIO_AF_SPI1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource7, GPIO_AF_SPI1);
// 配置SPI参数
SPI_InitStruct.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStruct.SPI_Mode = SPI_Mode_Master;
SPI_InitStruct.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;
SPI_InitStruct.SPI_NSS = SPI_NSS_Soft;
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; // 设置SPI时钟频率为APB2时钟的1/2
SPI_InitStruct.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStruct.SPI_CRCPolynomial = 7;
SPI_Init(SPI1, &SPI_InitStruct);
// 使能SPI
SPI_Cmd(SPI1, ENABLE);
}
uint8_t SPI_Transfer(uint8_t data)
{
// 等待发送缓冲区为空
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_TXE) == RESET);
// 发送数据
SPI_I2S_SendData(SPI1, data);
// 等待接收缓冲区非空
while (SPI_I2S_GetFlagStatus(SPI1, SPI_I2S_FLAG_RXNE) == RESET);
// 返回接收到的数据
return SPI_I2S_ReceiveData(SPI1);
}
int main(void)
{
uint8_t txData = 0xAA;
uint8_t rxData;
SPI_Init();
while (1)
{
// 发送并接收数据
rxData = SPI_Transfer(txData);
// 处理接收到的数据
// ...
// 延时一段时间
for (int i = 0; i < 100000; i++);
}
}
```
这是一个使用SPI1接口进行数据传输的示例代码。你可以根据自己的需求修改GPIO引脚和SPI参数。在`main`函数中,循环发送并接收数据,你可以在接收到数据后进行相应的处理。在每次数据传输之间,可以添加适当的延时。