写一个stm32的小端转uint8_t 存储字符串的代码
时间: 2023-03-30 13:03:50 浏览: 76
以下是将一个 uint32_t 类型的数据按照小端存储方式转换成 uint8_t 类型的字符串的代码:
```c
void uint32_to_little_endian_string(uint32_t data, uint8_t *str)
{
str[] = (uint8_t)(data & xFF);
str[1] = (uint8_t)((data >> 8) & xFF);
str[2] = (uint8_t)((data >> 16) & xFF);
str[3] = (uint8_t)((data >> 24) & xFF);
}
```
其中,`data` 是要转换的 uint32_t 类型的数据,`str` 是存储转换后的字符串的 uint8_t 类型数组。转换后的字符串按照小端存储方式排列,即低位字节在前,高位字节在后。
相关问题
编一个stm32控制蓝牙接收字符串的代码
由于 STM32 有多种型号,且每种型号的芯片资源分配不同,因此编写 STM32 控制蓝牙接收字符串的代码需要根据具体的 STM32 型号和蓝牙模块类型进行选择和修改。下面是一个示例代码,以 STM32F103C8T6 为例,使用 HC-05 蓝牙模块:
```c
#include "stm32f10x.h"
#include <stdio.h>
#include <string.h>
#define USARTx USART1
#define USARTx_IRQn USART1_IRQn
#define USARTx_IRQHandler USART1_IRQHandler
#define USART_BAUDRATE 9600
#define USARTx_TX_PIN GPIO_Pin_9
#define USARTx_TX_GPIO_PORT GPIOA
#define USARTx_RX_PIN GPIO_Pin_10
#define USARTx_RX_GPIO_PORT GPIOA
#define BUFFER_SIZE 64
char buffer[BUFFER_SIZE];
uint8_t index = 0;
uint8_t flag = 0;
void USART_Config(void)
{
USART_InitTypeDef USART_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = USARTx_TX_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(USARTx_TX_GPIO_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = USARTx_RX_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(USARTx_RX_GPIO_PORT, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = USART_BAUDRATE;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USARTx, &USART_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USARTx_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
USART_ITConfig(USARTx, USART_IT_RXNE, ENABLE);
USART_Cmd(USARTx, ENABLE);
}
void USARTx_IRQHandler(void)
{
if (USART_GetITStatus(USARTx, USART_IT_RXNE) != RESET)
{
char data = USART_ReceiveData(USARTx);
if (data == '\n')
{
buffer[index] = '\0';
flag = 1;
index = 0;
}
else
{
buffer[index++] = data;
}
}
}
int main(void)
{
USART_Config();
while (1)
{
if (flag)
{
flag = 0;
printf("Received string: %s\r\n", buffer);
}
}
}
```
该代码使用 USART1 串口收发数据,并配置了中断,当收到一个字符串时,会将其存储在 `buffer` 中,并打印出来。在 HC-05 蓝牙模块连接到 STM32 的 USART1 串口的情况下,当从蓝牙发送一个字符串并以换行符结尾时,就可以在串口调试助手中看到接收到的字符串了。如果使用其他型号的 STM32 或其他类型的蓝牙模块,则需要根据具体情况进行修改。
stm32f103c8t6通过usart1接收一个字符串
您好,要实现 STM32F103C8T6 通过 USART1 接收一个字符串,需要进行以下步骤:
1. 配置串口工作模式:初始化 USART1,使其工作在 UART 模式下,设置波特率、数据位、停止位和校验位等参数。
2. 配置串口接收中断:开启 USART1 的接收中断,使其能够在接收到数据时触发中断。
3. 编写中断服务函数:当 USART1 接收到数据时,会触发中断服务函数,在中断服务函数中,我们可以读取接收到的数据,并将其存储在一个缓冲区中。
4. 解析接收到的字符串:当接收到完整的字符串后,我们需要解析该字符串,并进行相应的操作。
下面是具体的代码实现(仅供参考):
```
#include "stm32f10x.h"
#define BUFFER_SIZE 50
uint8_t rx_buffer[BUFFER_SIZE];
uint8_t rx_index = 0;
void USART1_IRQHandler(void)
{
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
uint8_t data = USART_ReceiveData(USART1);
if (data == '\n') {
rx_buffer[rx_index] = '\0';
// 当接收到完整的字符串后,在这里添加相应的操作
rx_index = 0;
} else {
rx_buffer[rx_index++] = data;
}
}
}
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
// 打开 GPIOA 和 USART1 的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
// 配置 USART1 的引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; // TX
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; // RX
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置 USART1 的工作参数
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
// 配置 USART1 的接收中断
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
// 配置 NVIC 中断优先级和使能 USART1 的中断
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
// 启动 USART1
USART_Cmd(USART1, ENABLE);
while (1) {
// 在这里添加其他操作
}
}
```