按一下键盘rs485接收一次数据的51单片机程序
时间: 2023-12-02 14:01:53 浏览: 31
以下是一个简单的 51 单片机程序,实现 RS485 接收一次数据:
```c
#include <reg51.h>
sbit RS485_EN = P3^4;
void init_serial() {
TMOD = 0x20; // Timer 1, Mode 2: 8-bit auto-reload
TH1 = 0xFD; // 9600 baud rate
SCON = 0x50; // Serial mode 1, 8-bit data, 1 stop bit, receive enable
TR1 = 1; // Start timer 1
}
void main() {
unsigned char data;
init_serial();
RS485_EN = 0; // Enable RS485 receiver
while (1) {
if (RI) { // If data received
data = SBUF; // Read the received data
RI = 0; // Clear the receive flag
// Do something with the data
}
}
}
```
在主函数中,我们不断检查是否接收到了数据,如果 `RI` 标志位被置位,就说明收到了数据。我们从 `SBUF` 中读取数据,然后清除 `RI` 标志位,等待下一次接收。
需要注意的是,这个程序中使用了一个 `RS485_EN` 引脚控制 RS485 收发模式的切换。在接收数据时,我们需要将它设为 0,以使芯片处于接收模式。在发送数据时,我们将其设为 1,以使芯片处于发送模式。