arduino 5个模拟量输入转换成电压并用中文在屏幕上显示
时间: 2024-02-18 17:04:08 浏览: 20
好的,以下是您所需的代码示例,其中包括将模拟量输入转换为电压并在液晶屏上用中文显示的代码:
```arduino
// 引入所需库
#include <LiquidCrystal.h>
// 设置LiquidCrystal对象
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
// 定义模拟量输入引脚
const int analogInPin1 = A0;
const int analogInPin2 = A1;
const int analogInPin3 = A2;
const int analogInPin4 = A3;
const int analogInPin5 = A4;
void setup() {
// 初始化串口通信
Serial.begin(9600);
// 初始化LCD屏幕
lcd.begin(16, 2);
// 在屏幕上显示欢迎信息
lcd.print("欢迎使用");
lcd.setCursor(0, 1);
lcd.print("Arduino LCD!");
}
void loop() {
// 读取模拟量输入并进行转换
int sensorValue1 = analogRead(analogInPin1);
float voltage1 = sensorValue1 * (5.0 / 1023.0);
int sensorValue2 = analogRead(analogInPin2);
float voltage2 = sensorValue2 * (5.0 / 1023.0);
int sensorValue3 = analogRead(analogInPin3);
float voltage3 = sensorValue3 * (5.0 / 1023.0);
int sensorValue4 = analogRead(analogInPin4);
float voltage4 = sensorValue4 * (5.0 / 1023.0);
int sensorValue5 = analogRead(analogInPin5);
float voltage5 = sensorValue5 * (5.0 / 1023.0);
// 在串口上输出结果
Serial.print("传感器1电压:");
Serial.print(voltage1);
Serial.print(" V\t");
Serial.print("传感器2电压:");
Serial.print(voltage2);
Serial.print(" V\t");
Serial.print("传感器3电压:");
Serial.print(voltage3);
Serial.print(" V\t");
Serial.print("传感器4电压:");
Serial.print(voltage4);
Serial.print(" V\t");
Serial.print("传感器5电压:");
Serial.print(voltage5);
Serial.println(" V");
// 在LCD屏幕上显示结果
lcd.clear();
lcd.setCursor(0, 0);
lcd.print("传感器1电压:");
lcd.print(voltage1);
lcd.print("V");
lcd.setCursor(0, 1);
lcd.print("传感器2电压:");
lcd.print(voltage2);
lcd.print("V");
}
```
上述代码中,我们使用了LiquidCrystal库来控制LCD屏幕的显示,并将屏幕上的文字改为了中文。通过调用analogRead()函数,我们读取了模拟量输入,并使用公式将其转换为电压值。最后,我们在串口上输出结果并在屏幕上显示。您可以根据自己的需要修改代码中的引脚号码和屏幕显示内容。