写一个52单片机在液晶管上的程序
时间: 2023-11-30 21:03:32 浏览: 26
好的,以下是一个简单的52单片机在液晶管上显示“Hello, World!”的程序:
```c
#include <reg52.h>
#include <stdio.h>
#include <string.h>
#define LCD_DATA_PORT P0
sbit RS = P2^0; // 用于控制液晶管的RS引脚
sbit EN = P2^1; // 用于控制液晶管的EN引脚
void delay(unsigned int t) // 延时函数
{
unsigned int i, j;
for(i = 0; i < t; i++)
for(j = 0; j < 125; j++);
}
void write_cmd(unsigned char cmd) // 发送命令函数
{
RS = 0;
LCD_DATA_PORT = cmd;
EN = 1;
delay(1);
EN = 0;
}
void write_data(unsigned char dat) // 发送数据函数
{
RS = 1;
LCD_DATA_PORT = dat;
EN = 1;
delay(1);
EN = 0;
}
void init_lcd() // 初始化液晶管函数
{
write_cmd(0x38); // 设置16x2显示,5x8点阵,8位数据传输
write_cmd(0x0c); // 开启显示,光标关闭,光标闪烁关闭
write_cmd(0x06); // 光标右移,不移动屏幕
write_cmd(0x01); // 清空显示
}
void display_string(unsigned char x, unsigned char y, unsigned char *str) // 在指定位置显示字符串函数
{
unsigned char addr;
if(y == 0)
addr = 0x80 + x;
else
addr = 0xc0 + x;
write_cmd(addr);
while(*str != '\0')
{
write_data(*str);
str++;
}
}
void main()
{
unsigned char lcd_buffer[16];
init_lcd();
display_string(2, 0, "Hello, World!");
while(1);
}
```
该程序与51单片机的程序类似,只是使用了52单片机的头文件和编译器。同样使用P0口来连接液晶管的数据线,P2口来控制液晶管的RS和EN引脚。通过调用write_cmd()和write_data()函数来向液晶管发送命令和数据,最终在液晶管上显示出“Hello, World!”。