stm32l051c8t6 adc采集芯片温度与电压
时间: 2023-09-16 20:12:13 浏览: 56
STM32L051C8T6是一款低功耗的32位微控制器,它内置了12位ADC模块,可以实现对模拟信号的采集。以下是采集芯片温度与电压的步骤:
1. 配置ADC模块的时钟和分辨率。可以使用CubeMX工具进行配置,也可以手动编写代码进行配置。
2. 配置ADC通道。需要选择要采集的通道,可以选择内部温度传感器通道和外部电压通道。
3. 配置ADC采样时间。需要根据具体的采样信号进行配置。
4. 启动ADC转换。可以使用软件触发或者外部触发方式启动转换。
5. 等待ADC转换完成。可以使用轮询方式或者中断方式等待转换完成。
6. 读取ADC转换结果。可以将采样结果转换为实际的温度值和电压值。
以下是一段示例代码,可以实现对内部温度传感器和外部电压的采集:
```c
#include "stm32l0xx_hal.h"
ADC_HandleTypeDef hadc;
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(adcHandle->Instance==ADC1)
{
/* ADC1 clock enable */
__HAL_RCC_ADC1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**ADC GPIO Configuration
PA0 ------> ADC_IN0
*/
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
}
}
void MX_ADC_Init(void)
{
ADC_ChannelConfTypeDef sConfig = {0};
/**Common config
*/
hadc.Instance = ADC1;
hadc.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV1;
hadc.Init.Resolution = ADC_RESOLUTION_12B;
hadc.Init.ScanConvMode = DISABLE;
hadc.Init.ContinuousConvMode = DISABLE;
hadc.Init.DiscontinuousConvMode = DISABLE;
hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc.Init.NbrOfConversion = 1;
hadc.Init.DMAContinuousRequests = DISABLE;
hadc.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
if (HAL_ADC_Init(&hadc) != HAL_OK)
{
Error_Handler();
}
/**Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
sConfig.Rank = 1;
sConfig.SamplingTime = ADC_SAMPLETIME_19CYCLES_5;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
/**Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_0;
if (HAL_ADC_ConfigChannel(&hadc, &sConfig) != HAL_OK)
{
Error_Handler();
}
}
float GetTemperature()
{
HAL_ADC_Start(&hadc);
HAL_ADC_PollForConversion(&hadc, 100);
uint16_t adc_value = HAL_ADC_GetValue(&hadc);
float temperature = ((1.43 - ((float)adc_value * 3.3 / 4096)) / 0.0043) + 25;
return temperature;
}
float GetVoltage()
{
HAL_ADC_Start(&hadc);
HAL_ADC_PollForConversion(&hadc, 100);
uint16_t adc_value = HAL_ADC_GetValue(&hadc);
float voltage = (float)adc_value * 3.3 / 4096;
return voltage;
}
int main(void)
{
HAL_Init();
MX_ADC_Init();
while (1)
{
float temperature = GetTemperature();
float voltage = GetVoltage();
}
}
```
以上代码基于HAL库实现,使用了内部温度传感器通道和PA0通道进行采集。在GetTemperature和GetVoltage函数中,先启动ADC转换,等待转换完成后读取采样结果,并将结果转换为实际的温度值和电压值。需要注意的是,内部温度传感器的转换结果需要经过一定的计算才能得到实际的温度值。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)