![](https://csdnimg.cn/release/download_crawler_static/87426198/bg4.jpg)
DS90CF383B
SNLS178E –JULY 2004–REVISED APRIL 2013
www.ti.com
Transmitter Switching Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol Parameter Min Typ Max Units
LLHT LVDS Low-to-High Transition Time (Figure 4 ) 0.75 1.4 ns
LHLT LVDS High-to-Low Transition Time (Figure 4 ) 0.75 1.4 ns
TPPos0 Transmitter Output Pulse Position for Bit 0 (Figure 11 )
(1)
f = 65 −0.20 0 +0.20 ns
MHz
TPPos1 Transmitter Output Pulse Position for Bit 1 2.00 2.20 2.40 ns
TPPos2 Transmitter Output Pulse Position for Bit 2 4.20 4.40 4.60 ns
TPPos3 Transmitter Output Pulse Position for Bit 3 6.39 6.59 6.79 ns
TPPos4 Transmitter Output Pulse Position for Bit 4 8.59 8.79 8.99 ns
TPPos5 Transmitter Output Pulse Position for Bit 5 10.70 10.99 11.19 ns
TPPos6 Transmitter Output Pulse Position for Bit 6 12.99 13.19 13.39 ns
TPPos0 Transmitter Output Pulse Position for Bit 0 (Figure 11 )
(1)
f = 40 −0.25 0 +0.25 ns
MHz
TPPos1 Transmitter Output Pulse Position for Bit 1 3.32 3.57 3.82 ns
TPPos2 Transmitter Output Pulse Position for Bit 2 6.89 7.14 7.39 ns
TPPos3 Transmitter Output Pulse Position for Bit 3 10.46 10.71 10.96 ns
TPPos4 Transmitter Output Pulse Position for Bit 4 14.04 14.29 14.54 ns
TPPos5 Transmitter Output Pulse Position for Bit 5 17.61 17.86 18.11 ns
TPPos6 Transmitter Output Pulse Position for Bit 6 21.18 21.43 21.68 ns
TPPos0 Transmitter Output Pulse Position for Bit 0 (Figure 11 )
(1)
f = 25 −0.45 0 +0.45 ns
MHz
TPPos1 Transmitter Output Pulse Position for Bit 1 5.26 5.71 6.16 ns
TPPos2 Transmitter Output Pulse Position for Bit 2 10.98 11.43 11.88 ns
TPPos3 Transmitter Output Pulse Position for Bit 3 16.69 17.14 17.59 ns
TPPos4 Transmitter Output Pulse Position for Bit 4 22.41 22.86 23.31 ns
TPPos5 Transmitter Output Pulse Position for Bit 5 28.12 28.57 29.02 ns
TPPos6 Transmitter Output Pulse Position for Bit 6 33.84 34.29 34.74 ns
TSTC TxIN Setup to TxCLK IN (Figure 6 ) 2.5 ns
THTC TxIN Hold to TxCLK IN (Figure 6 ) 0.5 ns
TCCD TxCLK IN to TxCLK OUT Delay (Figure 7 ) 50% duty cycle input clock is 3.011 6.062 ns
assumed, T
A
= −10°C, and 65MHz for " Min ", T
A
= 70°C, and 25MHz for
" Max ", V
CC
= 3.6V
SSCG Spread Spectrum Clock support; Modulation frequency with a linear f = 25 100KHz ±
profile
(2)
MHz 2.5%/−5%
f = 40 100KHz ±
MHz 2.5%/−5%
f = 65 100KHz ±
MHz 2.5%/−5%
TPLLS Transmitter Phase Lock Loop Set (Figure 8 ) 10 ms
TPDD Transmitter Power Down Delay (Figure 10 ) 100 ns
(1) The Minimum and Maximum Limits are based on statistical analysis of the device performance over process, voltage, and temperature
ranges. This parameter is functionality tested only on Automatic Test Equipment (ATE).
(2) Care must be taken to ensure TSTC and THTC are met so input data are sampling correctly. This SSCG parameter only shows the
performance of tracking Spread Spectrum Clock applied to TxCLK IN pin, and reflects the result on TxCLKOUT+ and TxCLK− pins.
4 Submit Documentation Feedback Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: DS90CF383B