ISO/IEC11801-1 2017: 信息技术客户端布线通用规范

需积分: 10 12 浏览量更新于2024-06-30 收藏 2.92MB PDF 举报

"ISO_11801-1 2017.pdf" 本文档是关于ISO/IEC 11801-1:2017的国际标准，该标准详细定义了信息技术领域客户现场（如办公室、住宅等）的通用布线规范。这个标准的第1部分主要概述了通用要求，旨在确保不同设备和系统的互操作性和兼容性，从而为用户提供可靠和高效的网络连接。 ISO/IEC 11801-1是电气和电子工程领域的关键标准，它涵盖了多种类型的电缆、连接器和布线组件，包括但不限于双绞线（如Cat5e、Cat6、Cat6a、Cat7等）、光纤以及相关的硬件。这个标准不仅关注物理层的性能，还涉及电磁兼容性（EMC）、安全规定、环境影响和安装指导等多个方面。在2017年版中，可能包含了一些更新，如对高速数据传输能力的提升，适应了当前和未来网络技术的发展，比如支持更高速度的以太网标准，如10GBASE-T。此外，还可能增加了对新兴技术如PoE（Power over Ethernet）的支持，允许通过以太网电缆同时传输数据和电力。标准的实施确保了布线系统的质量，降低了维护成本，并有助于提高网络的稳定性和可靠性。对于设计、安装和维护网络基础设施的专业人员来说，理解和遵循ISO/IEC 11801-1标准至关重要，因为它为他们提供了统一的设计和施工指南，减少了因不兼容或不符合标准的布线方案导致的问题。此文档由Electrosuisse an Dätwyler Cabling Solutions AG出版，版权归属于ISO/IEC，未经书面许可，任何部分不得复制或以任何形式使用，包括电子和机械方式，如影印和缩微胶片。如果有关于ISO/IEC版权或获取此出版物更多使用权的查询，可以联系IEC中央办公室或所在国家的IEC成员国家委员会获取更多信息。 ISO/IEC 11801-1:2017是网络布线行业的基石，它规定了全球范围内布线系统的设计、安装和测试标准，确保了网络基础设施的质量和一致性。

– 14 – ISO/IEC 11801-1:2017 © ISO/IEC 2017

Figure 1 – Relationships between the generic cabling

documents produced by ISO/IEC JTC 1/SC 25

This document refers to International Standards for components and test methods wherever

appropriate International Standards are available.

IEC

Electrosuisse an: Dätwyler Cabling Solutions AG (3936), Auftrag 26545, 1 Lizenz, 08.01.2018

ISO/IEC 11801-1:2017 © ISO/IEC 2017 – 15 –

INFORMATION TECHNOLOGY –

GENERIC CABLING FOR CUSTOMER PREMISES –

Part 1: General requirements

1 Scope

This part of ISO/IEC 11801 specifies requirements that are common to the other parts of the

ISO/IEC 11801 series. Cabling specified by this document supports a wide range of services

including voice, data, and video that may also incorporate the supply of power.

This document specifies:

a) the fundamental structure and configuration of generic cabling requirements within the

types of premises defined by the other parts of the ISO/IEC 11801 series,

b) channel transmission and environmental performance requirements,

c) link performance requirements,

d) backbone cabling reference implementations in support of the parts of the ISO/IEC 11801

series,

e) component performance requirements, referring to available International Standards for

components and test methods where appropriate,

f) test procedures to verify conformance to the cabling transmission performance

requirements of the ISO/IEC 11801 series.

NOTE This document does not contain specific conformance requirements. The cabling design documents

supported by ISO/IEC 11801-1 incorporate the requirements of this document as part of their individual

conformance requirements.

In addition, this document provides information regarding the applications supported by the

cabling channels.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

IEC 60352-2, Solderless connections – Part 2: Crimped connections – General requirements,

test methods and practical guidance

IEC 60352-3, Solderless connections – Part 3: Solderless accessible insulation displacement

connections – General requirements, test methods and practical guidance

IEC 60352-4, Solderless connections – Part 4: Solderless non-accessible insulation

displacement connections – General requirements, test methods and practical guidance

IEC 60352-5, Solderless connections – Part 5: Press-in connections – General requirements,

test methods and practical guidance

IEC 60352-6, Solderless connections – Part 6: Insulation piercing connections – General

requirements, test methods and practical guidance

IEC 60352-7, Solderless connections – Part 7: Spring clamp connections – General

requirements, test methods and practical guidance

IEC 60352-8, Solderless connections – Part 8: Compression mount connections – General

requirements, test methods and practical guidance

Electrosuisse an: Dätwyler Cabling Solutions AG (3936), Auftrag 26545, 1 Lizenz, 08.01.2018

– 16 – ISO/IEC 11801-1:2017 © ISO/IEC 2017

IEC 60512-4-1, Connectors for electronic equipment – Tests and measurements – Part 4-1:

Voltage stress tests – Test 4a: Voltage proof

IEC 60512-4-2, Connectors for electronic equipment – Tests and measurements – Part 4-2:

Voltage stress tests – Test 4b: Partial discharge

IEC 60512-6-2, Connectors for electronic equipment – Tests and measurements – Part 6-2:

Dynamic stress tests – Test 6b: Bump

IEC 60512-6-3, Connectors for electronic equipment – Tests and measurements – Part 6-3:

Dynamic stress tests – Test 6c: Shock

IEC 60512-6-4, Connectors for electronic equipment – Tests and measurements – Part 6-4:

Dynamic stress tests – Test 6d: Vibration (sinusoidal)

IEC 60512-11-4, Connectors for electronic equipment – Tests and measurements – Part 11-4:

Climatic tests – Test 11d: Rapid change of temperature

IEC 60512-11-7, Connectors for electronic equipment – Tests and measurements – Part 11-7:

Climatic tests – Test 11g: Flowing mixed gas corrosion test

IEC 60512-11-9, Connectors for electronic equipment – Tests and measurements – Part 11-9:

Climatic tests – Test 11i: Dry heat

IEC 60512-11-10, Connectors for electronic equipment – Tests and measurements –

Part 11-10: Climatic tests – Test 11j: Cold

IEC 60512-11-12, Connectors for electronic equipment – Tests and measurements –

Part 11-12: Climatic tests – Test 11m: Damp heat, cyclic

IEC 60512-16-4, Connectors for electronic equipment – Tests and measurements – Part 16-4:

Mechanical tests on contacts and terminations – Test 16d: Tensile strength (crimped

connections)

IEC 60512-17-4, Connectors for electronic equipment – Tests and measurements – Part 17-4:

Cable clamping tests – Test 17d: Cable clamp resistance to cable torsion

IEC 60512-19-3, Electromechanical components for electronic equipment – Basic testing

procedures and measuring methods – Part 19: Chemical resistance tests – Section 3: Test

19c – Fluid resistance

IEC 60

512-23-3, Electromechanical components for electronic equipment – Basic testing

procedures and measuring methods – Part 23-3: Test 23c: Shielding effectiveness of

connectors and accessories

IEC 60512-99-001, Connectors for electronic equipment – Tests and measurements –

Part 99-001: Test schedule for engaging and separating connectors under electrical load –

Test 99a: Connectors used in twisted pair communication cabling with remote power

IEC 60529, Degrees of protection provided by enclosures (IP Code)

IEC 60603-7, Connectors for electronic equipment – Part 7: Detail specification for 8-way,

unshielded, free and fixed connectors

IEC 60603-7-1, Connectors for electronic equipment – Part 7-1: Detail specification for 8-way,

shielded, free and fixed connectors

IEC 60603-7-2, Connectors for electronic equipment – Part 7-2: Detail specification for 8-way,

unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

IEC 60603-7-3, Connectors for electronic equipment – Part 7-3: Detail specification for 8-way,

shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

Electrosuisse an: Dätwyler Cabling Solutions AG (3936), Auftrag 26545, 1 Lizenz, 08.01.2018

ISO/IEC 11801-1:2017 © ISO/IEC 2017 – 17 –

IEC 60603-7-4, Connectors for electronic equipment – Part 7-4: Detail specification for 8-way,

unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

IEC 60603-7-5, Connectors for electronic equipment – Part 7-5: Detail specification for 8-way,

shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

IEC 60603-7-7, Connectors for electronic equipment – Part 7-7: Detail specification for 8-way,

shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

IEC 60603-7-41, Connectors for electronic equipment – Part 7-41: Detail specification for 8-

way, unshielded, free and fixed connectors, for data transmissions with frequencies up to

500 MHz

IEC 60603-7-51, Connectors for electronic equipment – Part 7-51: Detail specification for

8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to

500 MHz

IEC 60603-7-71, Connectors for electronic equipment – Part 7-71: Detail specification for

8-way, shielded, free and fixed connectors, for data transmission with frequencies up to

1 000 MHz

IEC 60603-7-81, Connectors for electronic equipment – Part 7-81: Detail specification for

8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to

2 000 MHz

IEC 60603-7-82, Connectors for electronic equipment – Part 7-82: Detail specification for

8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with

frequencies up to 2 000 MHz

IEC 60793-1-40, Optical fibres – Part 1-40: Measurement methods and test procedures –

Attenuation

IEC 60793-2-10, Optical fibres – Part 2-10: Product specifications – Sectional specification for

category A1 multimode fibres

IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for

class B single-mode fibres

IEC 60794-1-21, Optical fibre cables – Part 1-21: Generic specification – Basic optical cable

test procedures – Mechanical test methods

IEC 60794-1-22, Optical fibre cables – Part 1-22: Generic specification – Basic optical cable

test procedures – Environmental test methods

IEC 60794-2, Optical fibre cables – Part 2: Indoor cables – Sectional specification

IEC 60794-2-51, Optical fibre cables – Part 2-51: Indoor cables – Detail specification for

simplex and duplex cables for use in cords for controlled environment

IEC 60

794-3, Optical fibre cables – Part 3: Outdoor cables – Sectional specification

IEC 60794-5, Optical fibre cables – Part 5: Sectional specification – Microduct cabling for

installation by blowing

IEC 60966-2-4, Radio frequency and coaxial cable assemblies – Part 2-4: Detail specification

for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 3 000 MHz,

IEC 61169-2 connectors

IEC 60966-2-5, Radio frequency and coaxial cable assemblies – Part 2-5: Detail specification

for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 1 000 MHz,

IEC 61169-2 connectors

Electrosuisse an: Dätwyler Cabling Solutions AG (3936), Auftrag 26545, 1 Lizenz, 08.01.2018

IEC 60966-2-6, Radio frequency and coaxial cable assemblies – Part 2-6: Detail specification

for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 3 000 MHz,

IEC 61169-24 connectors

IEC 61076-2-101, Connectors for electronic equipment – Product requirements – Part 2-101:

Circular connectors – Detail specification for M12 connectors with screw-locking

IEC 61076-2-109, Connectors for electronic equipment – Product requirements – Part 2-109:

Circular connectors – Detail specification for connectors with M 12 × 1 screw-locking, for data

transmission frequencies up to 500 MHz

IEC 61076-3-104, Connectors for electrical and electronic equipment – Product requirements

– Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data

transmissions with frequencies up to 2 000 MHz

IEC 61076-3-106, Connectors for electronic equipment – Product requirements – Part 3-106:

Rectangular connectors – Detail specification for protective housings for use with 8-way

shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7

series interface

IEC 61076-3-110, Connectors for electronic equipment – Product requirements – Part 3-110:

Detail specification for shielded, free and fixed connectors for data transmission with

frequencies up to 3 000 MHz

IEC 61156 (all parts), Multicore and symmetrical pair/quad cables for digital communications

IEC 61156-1, Multicore and symmetrical pair/quad cables for digital communications – Part 1:

Generic specification

IEC 61156-2, Multicore and symmetrical pair/quad cables for digital communications – Part 2:

Symmetrical pair/quad cables with transmission characteristics up to 100 MHz – Horizontal

floor wiring – Sectional specification

IEC 61156-3, Multicore and symmetrical pair/quad cables for digital communications – Part 3:

Work area cable – Sectional specification

IEC 61156-4, Multicore and symmetrical pair/quad cables for digital communications – Part 4:

Riser cables – Sectional specification

IEC 61156-5:2009, Multicore and symmetrical pair/quad cables for digital communications –

Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz –

Horizontal floor wiring – Sectional specification

IEC 61156-5:2009/AMD1:2012

IEC 61156-5-1, Multicore and symmetrical pair/quad cables for digital communications –

Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz –

Horizontal floor wiring – Blank detail specification

IEC 61156-6, Multicore and symmetrical pair/quad cables for digital communications – Part 6:

Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Work area

wiring – Sectional specification

IEC 61

156-6-1, Multicore and symmetrical pair/quad cables for digital communications – Part

6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Work

area wiring – Blank detail specification

IEC 61156-7, Multicore and symmetrical pair/quad cables for digital communications – Part 7:

Symmetrical pair cables with transmission characteristics up to 1 200 MHz – Sectional

specification for digital and analog communication cables

IEC 61156-9:2016, Multicore and symmetrical pair/quad cables for digital communications –

Part 9: Cables for channels with transmission characteristics up to 2 GHz – Sectional

specification

Electrosuisse an: Dätwyler Cabling Solutions AG (3936), Auftrag 26545, 1 Lizenz, 08.01.2018

剩余163页未读，继续阅读

网始如芯

粉丝: 538
资源: 23

ISO/IEC11801-1 2017: 信息技术 客户端布线通用规范

最新完整版标准 ISO 683-3-2022 - Part 3_ Case-hardening steels.pdf

C Standard C89 C90-ISO_IEC-9899-1990-含书签.pdf

ISO 683-3-2022- Part 3_ Case-hardening steels.pdf

iso_iec_14496-10-avc-2012.pdf

iso 11898-2-2016.pdf

iso15765-1-2-3-4pdf.zip

1_诊断相关/iso 14229-1-2020.pdf

iso/iec 11801-1:2017 pdf

在开发USB CCID智能卡读卡器时，如何深入理解USB CCID协议的通信机制，并依据技术文档《DWG_Smart_Card_USB_ICC_ICCD_rev10.pdf》实现特定功能的集成开发？

如何根据ISO/IEC 14496-14:2020标准解读MP4文件中的Track信息结构？

最新资源

ISO/IEC11801-1 2017: 信息技术客户端布线通用规范