CS5263中文设计方案.pdf

CS5263

设计方案

需积分: 30 40 浏览量更新于2023-04-28 收藏 363KB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

资源详情

资源推荐

ASL Confidential Page 5 of 14

CS5263AN

Datasheet

1 Introduction

The Capstone CS5263AN is a high-performance DP1.4 to HDMI2.0b converter, designed to connect a DP1.4

source to an HDMI2.0b sink. The CS5263AN integrates a DP1.4 compliant receiver, and a HDMI2.0b compliant

transmitter.

The DP interface comprises 4 main lanes, AUX channel, and HPD signal. The receiver supports maximum 5.4Gbps

(HBR2) data rate per lane. The DP receiver incorporates both HDCP1.4 and HDCP2.3 content protection scheme

with embedded key for secure transmission of digital audio-video content.

The HDMI interface includes 4 TMDS clock/data pairs, DDC, and HPD signal. The HDMI transmitter is capable of

supporting up to 6Gpbs data rate, quite adequate for handling video resolutions up to FHD 1080p 120Hz and

UHD 4k 60Hz formats. The HDMI transmitter incorporates HDCP engines which support both HDCP1.4 and

HDCP2.3. With the inclusion of HDCP, the CS5263AN allows secure transmission of protected content.

Embedded key is available that provides the highest level of HDCP key security.

The CS5263AN is a highly integrated single chip suitable for multiple market segments and display applications,

such as the dongle, docking station etc.

DisplayPort

4 lanes DP RX

HDMI TX

MCU

DMA

SPI

Billboard

I2C Master

I2C Slave

HDCP1.4/2.3

PATTERN_G

HDCP1.4/2.3

HDMI

Figure 1-1 CS5263AN Block Diagram

本内容试读结束，登录后可阅读更多

下载后可阅读完整内容，剩余9页未读，立即下载

CS536X是一款高性能USB Type-c/DisplayPort TM（DP）到HDMI2.0转换器，设计用于USB Type-c源到HDMI2.0sink。CS536X集成了符合DP1.4标准的接收器和符合hdmi2.0标准的发射器。还包括两个CC控制器用于CC通信，以实现DP Alt Mode和功率传输功能，一个用于上游Type-C端口，另一个用于下游端口。 DP接口包括2个主通道、AUX通道和HDP信号。接收器支持每个通道的最大8.1Gbps（HDBR3）数据速率。DP接收器和HDMI发送器包含支持HDCP1.4和HDCP2.3的HDCP引擎。由于包含HDCP，CS536X允许安全传输受保护的内容。嵌入式密钥可用，可提供最高级别的HDCP密钥安全性。 CS536X是一款高度集成的单芯片，适用于多个细分市场和显示应用，例如dongle、扩展坞产品等。

cs5263 pdf

CS5263是一种可以用来创建和查看PDF文件的计算机软件。PDF是便携式文档格式的缩写，在电子文件中广泛使用。这种格式的文件可以在多种操作系统和设备上以相同的格式和外观进行显示，而不会受到操作系统、软件版本或...

SELECT IFNULL( count( nt.id ), 0 ) total, IFNULL( count( ta.id ), 0 ) endtotal, cs.taskname,nt.id,nt.name FROM nk_xjsg_taskresult nt JOIN nk_xjsg_constask cs ON cs.id = nt.taskid AND cs.customerid = nt.customerid AND cs.pid = '40289e8c87fff7f80188042c15d50010' JOIN nk_xjsg_consplan nc ON nc.id = cs.pid AND nc.customerid = cs.customerid LEFT JOIN ( SELECT id, resultid, statusnum, statusname, endnum FROM nk_xjsg_taskresult_date WHERE customerid = '40289e8c8803a391018803a6ef8f0000' ) ta ON ta.resultid = nt.id and ta.statusnum = '40' -- AND ta.number = 1 -- -- AND ta.endnum = nt.resultnum WHERE nt.customerid = '40289e8c8803a391018803a6ef8f0000' GROUP BY cs.taskname ,nt.id ,nt.name; 为什么第一个total是5 不应该是1吗怎么修改成1

JOIN nk_xjsg_constask cs ON cs.id = nt.taskid AND cs.customerid = nt.customerid AND cs.pid = '40289e8c87fff7f80188042c15d50010' JOIN nk_xjsg_consplan nc ON nc.id = cs.pid AND nc.customerid = cs....

SELECT IFNULL(COUNT(DISTINCT nt.id), 0) total, IFNULL(COUNT( DISTINCT ta.id), 0) endtotal, cs.taskname, nt.id, nt.name FROM nk_xjsg_taskresult nt JOIN nk_xjsg_constask cs ON cs.id = nt.taskid AND cs.customerid = nt.customerid AND cs.pid = '40289e8c87fff7f80188042c15d50010' JOIN nk_xjsg_consplan nc ON nc.id = cs.pid AND nc.customerid = cs.customerid LEFT JOIN ( SELECT id, resultid, statusnum, statusname, endnum FROM nk_xjsg_taskresult_date WHERE customerid = '40289e8c8803a391018803a6ef8f0000' ) ta ON ta.resultid = nt.id and ta.statusnum = '40' -- AND ta.number = 1 -- AND ta.endnum = nt.resultnum WHERE nt.customerid = '40289e8c8803a391018803a6ef8f0000' GROUP BY cs.taskname, nt.id, nt.name; 怎么让endtotal的值从5变成1

JOIN nk_xjsg_constask cs ON cs.id = nt.taskid AND cs.customerid = nt.customerid AND cs.pid = '40289e8c87fff7f80188042c15d50010' JOIN nk_xjsg_consplan nc ON nc.id = cs.pid AND nc.customerid = cs....

cs5211_datasheet_v1.4.pdf

总之，cs5211_datasheet_v1.4.pdf是一个重要的技术文档，包含了特定电子设备或器件的详细规格和性能信息，是设计和制造过程中必不可少的参考资料。 ### 回答2： cs5211_datasheet_v1.4.pdf是一个电子数据表格的...

严重性代码说明项目文件行禁止显示状态错误 CS1503 参数 1: 无法从“iText.Kernel.Pdf.PdfReader”转换为“iText.Kernel.Pdf.PdfDocument” IText7Library E:\Study\Pragram\C#\PDF\PDFStudio\IText7Library\PDFHelp\TableAnalyzer.cs 23 活动

这个错误发生在将 iText7 的 PdfReader 对象转换为 PdfDocument 对象时。PdfReader 类和 PdfDocument 类是 iText7 中处理 PDF 文件的两个重要类。它们之间的区别在于，PdfReader 用于打开 PDF 文件并读取其内容，而 ...

优化下面的sql语句，达到最优：DECLARE @dtNow VARCHAR(100) = CONVERT(VARCHAR(100),GETDATE(),23); SELECT TOP 1 k.Name kehuName ,ISNULL(MaskingApply.quanxianSum,0) quanxianSum FROM xykehu k WITH(NOLOCK) LEFT JOIN ( SELECT cs.quanxianSum,cs.AddTime FROM ClearShowApply cs WITH(NOLOCK) WHERE ISNULL(cs.IsDel,0)=0 AND cs.State='审批通过' AND cs.PowerEndTime > @dtNow AND cs.XyKehuId = @kehuId AND cs.UsersId= @userId UNION SELECT cs.quanxianSum,cs.AddTime FROM ClearShowApply cs WITH(NOLOCK) WHERE ISNULL(cs.IsDel,0)=0 AND cs.State='审批通过' AND cs.PowerEndTime > @dtNow AND cs.XyKehuId = @kehuId AND cs.CardId= @cardId ) MaskingApply ON 1 = 1 WHERE k.Id = @kehuId AND ISNULL(k.IsDel,0)=0 ORDER BY MaskingApply.AddTime DESC;

ClearShowApply AS cs WITH(NOLOCK) WHERE ISNULL(cs.IsDel, 0) = 0 AND cs.State = '审批通过' AND cs.PowerEndTime > @dtNow AND cs.XyKehuId = @kehuId AND cs.UsersId = @userId UNION ALL SELECT ...

SELECT cs.taskname, rt.taskcont, rp.YEAR, rp.taskcont rpname, rp.iszb, ni.id, ifnull( ni.totalfinance, '0' ) totalfinance, ifnull( ni.centralfinance, '0' ) centralfinance, ifnull( ni.localfinance, '0' ) localfinance, ifnull( ni.investedfinance, '0' ) investedfinance, ifnull( ni.supportfinance, '0' ) supportfinance, ifnull( ni.selffinance, '0' ) selffinance, ni.statusnum FROM nk_xjsg_constask cs JOIN nk_xjsg_refinetask rt ON cs.id = rt.taskid AND cs.customerid = rt.customerid JOIN nk_xjsg_refinetask_process rp ON rt.id = rp.rtaskid AND rt.customerid = rp.customerid LEFT JOIN nk_xjsg_itembudget ni ON ni.rpid = rp.id AND ni.customerid = rp.customerid join nk_xjsg_process_leader nl on nl.itemid = rp.id and nl.customerid = rp.customerid join nk_user_info nui on nui.id = nl.tid and nui.customerid = nl.customerid where cs.pid = '40289e8c87fff7f80188042c15d50010' and ni.flowtaskid in ('40289e8b87a7c0ef0188527f09700206','40289e8b87a7c0ef018852359f600204') where cs.pid = '40289e8c87fff7f80188042c15d50010' > 1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'where cs.pid = '40289e8c87fff7f80188042c15d50010'' at line 33 哪里错了

JOIN nk_xjsg_refinetask rt ON cs.id = rt.taskid AND cs.customerid = rt.customerid JOIN nk_xjsg_refinetask_process rp ON rt.id = rp.rtaskid AND rt.customerid = rp.customerid LEFT JOIN nk_xjsg_...

Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at com.cs.domain.TetrisModel.moveLeftRote(TetrisModel.java:44) at com.cs.main.KeyActionListener.moveAction(KeyActionListener.java:125) at com.cs.main.KeyActionListener.keyPressed(Key

这个异常是一个空指针异常（NullPointerException），它在Java中经常出现。根据错误信息，异常发生在`TetrisModel.java`的第44行，具体是在`moveLeftRote`方法中。另外，异常的触发是由于`KeyActionListener.java`中...

friend string operator-(const ColorString& cs1, const ColorString& cs2) { ColorString cs; cs.str =cs1.str - cs2.str ; return cs.str ; }

这是一个重载运算符 "-" 的函数，输入参数为两个 ColorString 类型的对象，返回值为一个 friend string 类型的字符串。在函数内部，将两个对象的字符串成员相减，得到一个新的字符串，赋值给另一个 ColorString 对象...

NullReferenceException: Object reference not set to an instance of an object BattleStageControl.OpenBattleRewardNext () (at Assets/0.C#/Battle/BattleStageControl.cs:102) BattleStageControl.OpenBattleReward () (at Assets/0.C#/Battle/BattleStageControl.cs:70) EventCenter.Broadcast (MeventType MeventType) (at Assets/0.C#/Common/EventCenter.cs:162) FuguiState.DeleteFugui02 (System.String site, System.String FuguiName) (at Assets/0.C#/Map/FuguiState.cs:231) EventCenter.Broadcast[T,X] (MeventType MeventType, T arg1, X arg2) (at Assets/0.C#/Common/EventCenter.cs:196) SaveDataManager.DeleteFugui01 (System.String site, System.String FuguiName) (at Assets/0.C#/Common/SaveDataManager.cs:517) EventCenter.Broadcast[T,X] (MeventType MeventType, T arg1, X arg2) (at Assets/0.C#/Common/EventCenter.cs:196) FuguiActionTriger.clickToDelete () (at Assets/0.C#/Battle/FuguiActionTriger.cs:519) UnityEngine.Events.InvokableCall.Invoke () (at <c6956609c5d74f5d8e6ed4e5e5f40cc2>:0) UnityEngine.Events.UnityEvent.Invoke () (at <c6956609c5d74f5d8e6ed4e5e5f40cc2>:0) UnityEngine.UI.Button.Press () (at Library/PackageCache/com.unity.ugui@1.0.0/Runtime/UI/Core/Button.cs:70) UnityEngine.UI.Button.OnPointerClick (UnityEngine.EventSystems.PointerEventData eventData) (at Library/PackageCache/com.unity.ugui@1.0.0/Runtime/UI/Core/Button.cs:114) UnityEngine.EventSystems.ExecuteEvents.Execute (UnityEngine.EventSystems.IPointerClickHandler handler, UnityEngine.EventSystems.BaseEventData eventData) (at Library/PackageCache/com.unity.ugui@1.0.0/Runtime/EventSystem/ExecuteEvents.cs:57) UnityEngine.EventSystems.ExecuteEvents.Execute[T] (UnityEngine.GameObject target, UnityEngine.EventSystems.BaseEventData eventData, UnityEngine.EventSystems.ExecuteEvents+EventFunction`1[T1] functor) (at Library/PackageCache/com.unity.ugui@1.0.0/Runtime/EventSystem/ExecuteEvents.cs:272) UnityEngine.EventSystems.EventSystem:Update() (at Library/PackageCache/com.unity.ugui@1.0.0/Runtime/EventSystem/EventSystem.cs:501)什么意思

这是一个程序异常的错误信息，错误提示为 "对象引用未...具体的错误出现在Assets/0.C#/Battle/BattleStageControl.cs文件的第102行和第70行，以及其他几个文件中。需要检查代码中是否有未初始化的对象，并且进行修复。

max7219 max7219_inst( .clk(clk), .rst(rst), .din(din), .cs(cs), .clk(clk), .dout(dout) );怎么写

.cs(cs), .dout(dout) ); ``` 其中，`max7219` 是模块的名称，`max7219_inst` 是此实例的名称，`.clk(clk)` 表示将外部输入信号 `clk` 连接到模块的时钟信号输入端口上，`.rst(rst)` 表示将外部输入信号 `rst` ...

C++调用此命令行 commandLine = L"C:\\Users\\Administrator\\Desktop\\test\\cs222\\cs.exe hangai285846@163.com qwrt6789 111";

对于你提供的命令行`commandLine = L"C:\\Users\\Administrator\\Desktop\\test\\cs222\\cs.exe hangai285846@163.com qwrt6789 111"`，你可以使用以下代码来调用： ```cpp #include int main() { const wchar_t...

写一个python脚本，根据${id}，查看report目录下的"cs_${id}.log"，并找到这个文件的最后一行，如果最后一行含有"开始下载"字符串，就获取后面的\d{4}\.\d{5}\.pdf 或 \d{4}\.\d{5}\.tar

filename = f"report/cs_{id}.log" with open(filename, "r") as file: lines = file.readlines() last_line = lines[-1].strip() if "开始下载" in last_line: match = re.search(r"(\d{4}\.\d{5}\.(?:pdf|tar))...

请改进代码,解析里面的期货代码为中文名字.https://raw.githubusercontent.com/pentestcoffee/cs/main/test.html

很抱歉，我是一名语言模型...请注意，这里的期货代码和中文名称对应关系是示例，你需要根据实际情况进行修改。另外，这个实现方式并不完美，例如当代码出现在标签属性中时，可能无法正确替换。但这应该可以帮助你入手。

q2755130042

粉丝: 11
资源: 22

会员权益专享

CS5263中文设计方案.pdf

CS5263 DP1.4 to HDMI2.0 PCB原理图.pdf

CS5263AN_Datasheet_V1.0.pdf

CS5363-CS5365-CS5366规格书-CS536X最新版规格书

cs5263 pdf

cs5211_datasheet_v1.4.pdf

严重性 代码 说明 项目 文件 行 禁止显示状态 错误 CS1503 参数 1: 无法从“iText.Kernel.Pdf.PdfReader”转换为“iText.Kernel.Pdf.PdfDocument” IText7Library E:\Study\Pragram\C#\PDF\PDFStudio\IText7Library\PDFHelp\TableAnalyzer.cs 23 活动

水墨屏除了SCK.MISO.CS.RS.RESET.VCC.GND还有什么引脚

Invalid bound statement (not found): com.ruoyi.cs.mapper.CsGoodsMapper.selectCsGoodsList

wget https://cg.cs.tsinghua.edu.cn/jittor/assets/build/generator_last.pkl ^ SyntaxError: invalid syntax