![](https://csdnimg.cn/release/download_crawler_static/9441033/bg12.jpg)
The LabManager® product family contains automation devices of
dierent sizes that are built up in a modular manner. This ensures that
you always obtain a device which best meets your requirements.
LabManager® to
The LabManager® 1 is the standard device for laboratory and pilot
plants with up to 20 interfaces.
The LabManager® 2 can be equipped with 32 interfaces and the
LabManager®3 with 48 interfaces.
All devices in the LabManager® family can be expanded to include
additional sub-stations using a BCU module (bus coupling module).
The LabManager module racks® generally equipped with a 32-bit
CPU slide-in module. Communication is carried out with the operator
station using Ethernet or an optional RS-232. interface.
The power-saving processor technology produces very little heat loss
so that the devices can be generally run without forced ventilation.
This ensures high reliability and service life.
The robust metal case of the LabManager is suitable for free-standing
arrangement and for the mounting in control cabinets or 19-inch
racks. The user interfaces for the basic device functions are located on
the front panel of the LabManager.
Characteristics
› -bit CPU
› Redundant time base and system monitoring system (Watchdog)
› USB interfaces for data media and optional interfaces
› RS- Modbus interfaces
› Ethernet and RS- interface
› Integrated power supply for sensors and actuators
All devices are available as a module rack for individual mounting.
Assembly options
In the standard assembly of the LabManager, the slide-in modules
form the rear panel of the device.
Where it is planned that several racks be supplied by a LabManager®
or little space is available on site for the connection equipment, the
interfaces can be distributed across sub-stations (see Sub-stations).
LabManager® module rack for individual mounting
A LabManager® module rack for individual mounting will be tted
with slide-in modules in accordance with your demands.
A LabManager® AS for measuring tasks may comprise:
› A LabManager® module rack (e.g. LM-LABMB)
› A CPU slide-in module (LM-CPU)
› Interface slide-in modules (e.g. x LM-AI and x LM-RTD-P)
This sample conguration then has eight potential-free universal
analogue inputs and eight inputs for Pt100 temperature sensors and
is suitable for acting as a data logging and monitoring system.
If more than 8 module racks are required in addition to the CPU slide-
in module, a LabManager® module rack 3 or additional sub-stations
may be used.
A power supply for sensors and actuators is already integrated into
the LabManager® module racks.
The CPU slide-in module (LM-CPU) and interface slide-in modules
are additionally required for use as an independent AS. Should the
LabManager® module rack be simply required to act as a sub-station
for another AS, a BCU module (LM-BCUI) is required in place of a CPU
module.
Where there is a further requirement for interfaces, several devices
can be operated from one OS.
The connecting technology is uniformly based on slide-in modules
with standardized plugs and sockets.
The LabManager® product family
151201
Automation Technique
96
HiTec Zang GmbH • +49(0)2407 / 910 100 • info@hitec-zang.com • www.hitec-zang.com