没有合适的资源？快使用搜索试试~ 我知道了~

首页Telelogic Synergy Classic CLI 7.0用户指南与命令行接口详解

Telelogic Synergy Classic CLI 7.0用户指南与命令行接口详解

synergy

需积分: 9 1 下载量 81 浏览量更新于2024-07-18 收藏 3.99MB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

试读

548页

本文档是关于Telelogic Synergy Classic CLI (Command Line Interface) 的帮助文档，适用于Release 7.0版本。该版本适用于产品编号为5724V66的Telelogic Synergy软件，以及后续的所有发布和修改，除非在新版本中有明确指出。文档强调在使用前阅读" Notices"部分的通用信息，位于第34页。首先，文档提供了一般性使用信息，包括如何使用命令行界面。对于Windows用户，章节3介绍了命令行界面的操作指南，而针对UNIX用户，第四章详细阐述了相应的操作步骤。接下来，章节5集中讨论了Telelogic Synergy的各种接口，展示了这些接口的功能和适用场景。文档的核心部分在于第7章，解释了Telelogic Synergy的帮助系统，包括如何查询和理解命令、参数及其功能。章节8涉及术语变更和名称调整，以适应7.0版本的更新。对于命令和参数的语法，第十章给出了详细的规则和指导，这对于准确执行操作至关重要。在命名规范方面，第22章列出了限制条件，包括大小写和文件名长度的规定，以确保系统的兼容性和一致性。日期格式的处理也在第26节有所阐述。内置关键词（Built-In keywords）和正则表达式的使用在第27和30章中讲解，这些都是编写脚本和自动化任务的关键元素。章节32聚焦于管理目的和模板的运用，这些功能有助于用户更有效地配置和管理Synergy。文档的后半部分包含" Notices"，提供了关于版权、政府用户权限以及默认设置的重要信息。此外，文档还讨论了默认设置的管理和重置方法（第37-40节），并特别提到了Windows环境下的初始化文件设置，这部分在第68页详细展开。整体而言，这份帮助文档为Telelogic Synergy Classic CLI的用户提供了全面且实用的指导，涵盖了从基础操作到高级管理的方方面面。

资源详情

资源推荐

General usage information

Telelogic Synergy Classic CLI Help, Release 7.0

Commands have also been changed for consistency between interfaces. For example,

the

ccm update command also exists as the ccm reconfigure command. Links in the

help take you to commands renamed with the new terminology. Aliases have been written

so that scripts using the 6.3 and 6.4 commands can be used. References to the terms

used in prior releases have been placed in the help for your convenience.

Telelogic Synergy Classic CLI Help, Release 7.0 11

Command and argument syntax

You can enter the commands to run the Telelogic Synergy tool as follows:

•The ccm command prefix precedes each user command. Enter user commands

individually, such as:

Windows: ccm dir

UNIX: ccm ls

• The Windows administrative commands are discussed in the Telelogic Synergy

Administration Guide for Windows. Documents are available on the

Synergy Support

Web site.

• On UNIX, some administrative commands also use the ccm command prefix, but you

also must prepend the command with an underscore. Enter these administrative

commands individually, such as:

$ ccm_install

• The UNIX administrative commands are discussed in the Telelogic Synergy

Administration Guide for UNIX. Users running on an Oracle database should use

Telelogic Synergy Administration Guide for UNIX (Oracle).

The majority of the commands in the command set require a file_spec or a

project_spec as an argument. These arguments enable you to specify a controlled

object in a Telelogic Synergy database. Other common arguments are

task_spec,

folder_spec, and change_request_spec.

The following topics are described:

Baseline specification

Change request specification

File specification

Folder specification

Problem specification

Project specification

Project grouping specification

Task specification

General usage information

Telelogic Synergy Classic CLI Help, Release 7.0

Baseline specification

A baseline_spec is a reference to baseline name. A baseline_spec can have any of the

following forms.

• baseline_name

• a selection set reference (@number)

• the entire selection set reference (@)

When you release a baseline, you can specify a baseline_spec that includes a leading

DCM database ID (dbid) and a DCM delimiter (for example,

J#; where J is the dbid and #

is the DCM delimiter).

Version template specification

A version_template is any string, with optional keywords, which can be of the

form

%keyword or %{keyword}. The keyword can be any Telelogic Synergy attribute,

the special keyword

%baseline_name, or the special keywords, %date and %build.

When an attribute is specified, the corresponding attribute value from the prep project

or product being copied is used.

Alternate keyword syntax for version template

The keyword syntax provides a way to alter the expansion behavior of keywords

based on their existence.

• %{keyword:-string} If keyword is set and is non-null, it expands normally;

otherwise it expands to string. Note that

string can be an empty string if you

want to see nothing when the keyword is not found.

•

%{keyword:+string} If keyword is set and is non-null, it expands to string;

otherwise it expands to the empty string (substitute nothing).

So, to get solaris_7.0 or 7.0 (depending on whether platform exists), specify the

following:

%{platform:-}%{platform:+_}7.0

• %{platform:-} expands to solaris if the platform exists (and was solaris);

otherwise it expands to the empty string.

•

%{platform:+_} expands to _ if the platform exists; otherwise it expands to the

empty string.

Telelogic Synergy Classic CLI Help, Release 7.0 13

Command and argument syntax

Change request specification

A change_request_spec is a reference to one or more change requests. A

change_request_spec can have any of the following forms:

• change_request_number (a single change request number)

• change_request_number,change_request_number (a list of change request

numbers separated by commas)

• change_request_number-change_request_number (a range of values)

• selection set reference (@number)

General usage information

Telelogic Synergy Classic CLI Help, Release 7.0

File specification

A file_spec is a reference to a non-project object version in the Telelogic Synergy

database.

A file_spec can be in one of four forms:

• Work area reference form

• Selection set reference form

• Project reference form

• Object reference form

An object_name can contain up to 151 characters; the object’s version can contain up to

32 characters.

Work area reference form

When an object version is a member of a project and the project is synchronized

under a work area directory in the file system, you can reference the object version by

its path in the projected directory structure.

The following example uses Windows paths. The functionality is the same on UNIX.

For example, if the

foo.c-4 object version is a member of the jobA-1 project under

the

dir1 directory and the project’s work area is c:\users\joe\ccm_tutorial, the

work area reference form for

foo.c-4 is:

c:\users\joe\ccm_tutorial\jobA-1\jobA\dir1\foo.c

If the current working directory is c:\users\joe\ccmtest\jobA-1\jobA, you can

reference the

foo.c-4 object version by using the relative path file_spec:

dir1\foo.c

You can augment the file_spec with the version to refer to another version of the

object:

path\object_name[-version]

Use this file specification to refer to any different versions of the object version.

For example, if foo.c-4 is a member of the current project and has a predecessor

foo.c-1, you can reference the predecessor by using the relative path belonging to

foo.c-4:

dir1\foo.c-1

You can use the ccm delimiter command to change the delimiter, which separates

the object from its version. You must be in the ccm_admin role to change the delimiter,

as this command changes the delimiter for the entire database. (Be sure to read the

Note shown for the delimiter command.)

剩余547页未读，继续阅读

粉丝: 0
资源: 1

上传资源快速赚钱

我的内容管理展开

我的资源快来上传第一个资源

我的收益

登录查看自己的收益

我的积分登录查看自己的积分

我的C币登录后查看C币余额

我的收藏

我的下载

下载帮助

Telelogic Synergy Classic CLI 7.0用户指南与命令行接口详解

synergy各种版本全集

synergy1.10.1.rar

synergy报错no systemtrayicon available synergy

synergy for linux 下载

synergy1.8

synergy客户端连不上

ubuntu22.04安装synergy

synergy v1.14.6 mac

synergy,开源软

ubuntu安装synergy

synergy1.3.8

synergy安装教程

synergy1.8 使用

synergy使用教程

synergy-v1.8.8-stable-windows-x64.msi

synergy window 1.8.8

QT中在头文件中定义了QUdpSocket* synergy_udpSocket，如何判断C文件中有没有初始化

那么在ubuntu有没有较好的类似spacedesk的软件呢

安装synergypro

Sentinel-6 Michael Freilich Altimetry and Its Synergy with Other Observations for Ocean Monitoring and Forecasting的意思

最新资源