StM32串口自收发代码
时间: 2023-09-12 07:03:08 浏览: 33
以下是STM32串口自收发代码的示例:
```c
#include "stm32f10x.h"
USART_InitTypeDef USART_InitStructure;
void USART_Configuration(void) {
GPIO_InitTypeDef GPIO_InitStructure;
// 使能相应的外设时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
// 配置USART1的Tx引脚为复用推挽输出
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置USART1的Rx引脚为浮空输入
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// USART1配置
USART_InitStructure.USART_BaudRate = 115200; // 波特率
USART_InitStructure.USART_WordLength = USART_WordLength_8b; // 字长为8位数据格式
USART_InitStructure.USART_StopBits = USART_StopBits_1; // 一个停止位
USART_InitStructure.USART_Parity = USART_Parity_No; // 无奇偶校验位
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; // 无硬件数据流控制
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; // 支持接收和发送
USART_Init(USART1, &USART_InitStructure);
// 使能USART1
USART_Cmd(USART1, ENABLE);
}
int main(void) {
USART_Configuration();
while (1) {
// 等待接收到数据
while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET);
// 读取数据
uint16_t data = USART_ReceiveData(USART1);
// 发送数据
USART_SendData(USART1, data);
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
}
}
```
在上面的代码中,我们首先调用`USART_Configuration`函数来进行串口的初始化配置。然后,在主循环中,我们使用`USART_GetFlagStatus`函数来等待接收到数据,并使用`USART_ReceiveData`函数来读取数据。接着,我们使用`USART_SendData`函数将读取到的数据发送回去,并使用`USART_GetFlagStatus`函数等待数据发送完成。这样,就实现了STM32串口自收发的功能。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)