In the 3D people counting demo, the detection layer is responsible for sensing multiple reflections from the 3D environment around the sensor and delivering a rich set of measurement vectors, known as the point cloud, representing the real-life targets in the scene. The complex analog-to-digital converter (ADC) data (i.e., the beat signal) from the sensor front-end is the input of the detection layer. Each measurement vector generated by the detection layer represents a reflection point with range, azimuth, elevation, radial velocity (i.e., Doppler), and signal-to-noise ratio (SNR), as discussed in the following sections. A tracking layer [2][3] then processes the point cloud to localize and track the detected targets in the scene. A classification layer (which is not part of the existing 3D people counting demo) can further classify the detected targets to create a complete processing chain to be visualized.翻译一下
时间: 2024-03-19 19:40:26 浏览: 10
在 3D 人数统计演示中,检测层负责感知传感器周围的 3D 环境中的多次反射,并提供代表场景中实际目标的丰富的测量向量,称为点云。来自传感器前端的复杂模拟数字转换器(ADC)数据(即拍打信号)是检测层的输入。检测层生成的每个测量向量都表示具有距离、方位、俯仰、径向速度(即多普勒)和信噪比(SNR)的反射点,如下所述。然后,跟踪层[2][3]处理点云以定位和跟踪场景中检测到的目标。分类层(不是现有的 3D 人数统计演示的一部分)可以进一步对检测到的目标进行分类,以创建完整的处理链以进行可视化。
相关问题
mysql数据库新增字段报错:1118-Row size too large. The maximum row size for the used table type, not counting BLOBs, is 65535
当在MySQL数据库中新增字段时,如果出现错误1118-Row size too large. The maximum row size for the used table type, not counting BLOBs, is 65535,这是由于MySQL要求一个行的定义长度不能超过65535而导致的。具体而言,这是因为MySQL在设计表时,每行数据的大小是有限制的,这个限制是由MySQL的存储引擎来决定的。在InnoDB存储引擎中,一个行的定义长度不能超过65535个字节,而这个长度不包括BLOB和TEXT类型的列。如果你在设计表时,新增的字段导致了行的定义长度超过了这个限制,就会出现上述错误。
解决这个问题的方法有以下几种:
1. 调整表结构,将一些不必要的列删除或者将一些较长的列改为BLOB或TEXT类型,从而减小行的定义长度。
2. 将表的存储引擎改为MyISAM,因为MyISAM存储引擎对行的定义长度没有限制,但是需要注意的是,MyISAM存储引擎不支持事务和行级锁定。
3. 将表的存储引擎改为InnoDB,并调整InnoDB的参数,例如将innodb_log_file_size和innodb_log_buffer_size等参数调大,从而增加InnoDB存储引擎的性能和容量。
Specifies the repetition counter value. Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). 是什么意思
这段描述是关于一个叫做"重复计数器"(Repetition Counter)的功能的说明。重复计数器是一个用于控制重复计数的模块,可以在达到特定的计数值时触发一个更新事件,并重新开始计数。
具体来说,当重复计数器的倒计数(RCR downcounter)达到零时,就会生成一个更新事件,并从重复计数器的初始值(N)重新开始计数。这个功能可以用来定时触发某些操作或事件,例如周期性地执行某个任务或生成定时中断等。
这段描述可能是在介绍某个系统或硬件组件的功能,具体的上下文可能会有所不同。但总体来说,这段描述解释了重复计数器的作用和工作原理。