写一个STM32F103C8T6和AD5272(IIC型号)的模拟IIC的案例代码
时间: 2024-04-21 16:22:15 浏览: 28
以下是一个使用STM32F103C8T6和AD5272(I2C型号)的模拟I2C通信的案例代码:
```c
#include "stm32f10x.h"
#include "delay.h"
#define SDA_PIN GPIO_Pin_7
#define SCL_PIN GPIO_Pin_6
#define I2C_GPIO_PORT GPIOB
#define I2C_GPIO_CLK RCC_APB2Periph_GPIOB
#define AD5272_I2C_ADDR 0x2C // AD5272的I2C地址
void I2C_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// Enable GPIOB clock
RCC_APB2PeriphClockCmd(I2C_GPIO_CLK, ENABLE);
// Configure SDA and SCL pins
GPIO_InitStructure.GPIO_Pin = SDA_PIN | SCL_PIN;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
GPIO_Init(I2C_GPIO_PORT, &GPIO_InitStructure);
// Set SDA and SCL pins high
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN | SCL_PIN);
}
void I2C_Start(void)
{
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_ResetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
GPIO_ResetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
}
void I2C_Stop(void)
{
GPIO_ResetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
}
void I2C_SendByte(uint8_t byte)
{
for (uint8_t i = 0; i < 8; i++)
{
if (byte & 0x80)
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN);
else
GPIO_ResetBits(I2C_GPIO_PORT, SDA_PIN);
byte <<= 1;
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_ResetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
}
}
void I2C_SendAck(void)
{
GPIO_ResetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_ResetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
}
void I2C_SendNack(void)
{
GPIO_SetBits(I2C_GPIO_PORT, SDA_PIN);
delay_us(1);
GPIO_SetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
GPIO_ResetBits(I2C_GPIO_PORT, SCL_PIN);
delay_us(1);
}
void AD5272_SetResistorValue(uint16_t value)
{
I2C_Start();
I2C_SendByte(AD5272_I2C_ADDR << 1); // Send AD5272 address for write
I2C_SendByte((value >> 8) & 0xFF); // MSB
I2C_SendByte(value & 0xFF); // LSB
I2C_Stop();
}
int main(void)
{
// Initialize I2C
I2C_Configuration();
// Set resistor value to 500 ohms
AD5272_SetResistorValue(500);
while (1)
{
// Your code here
}
}
```
这个案例代码通过模拟I2C总线控制STM32F103C8T6与AD5272之间的通信。在main函数中,我们首先调用`I2C_Configuration()`函数来配置模拟I2C总线的引脚。然后,我们使用`AD5272_SetResistorValue()`函数来设置AD5272的电阻值,这里设置为500欧姆。你可以根据需要修改电阻值。
请注意,这个代码只是一个简单的示例,实际应用中可能需要根据具体的硬件电路和AD5272的规格进行适当的修改和调整。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)