我问的是3399通过vpu解码的代码
时间: 2024-03-14 13:49:01 浏览: 19
对于RK3399的VPU硬件解码器,可以使用Rockchip提供的硬件解码器库(Rockchip Hardware Decoder)来实现。以下是一个使用该库进行视频解码的示例代码:
```c++
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/videodev2.h>
#include <rockchip/rk_vpu.h>
#define INPUT_FILE "input.h264"
#define OUTPUT_FILE "output.yuv"
int main(int argc, char **argv)
{
FILE *fp_in, *fp_out;
int fd_vpu, ret;
struct v4l2_format fmt;
struct vpu_dec_in dec_in;
struct vpu_dec_out dec_out;
// 打开输入文件
fp_in = fopen(INPUT_FILE, "rb");
if (!fp_in) {
printf("Failed to open input file: %s\n", INPUT_FILE);
return -1;
}
// 打开输出文件
fp_out = fopen(OUTPUT_FILE, "wb");
if (!fp_out) {
printf("Failed to open output file: %s\n", OUTPUT_FILE);
return -1;
}
// 打开VPU设备
fd_vpu = open("/dev/rk_vpu", O_RDWR);
if (fd_vpu < 0) {
printf("Failed to open /dev/rk_vpu\n");
return -1;
}
// 配置VPU解码器
memset(&fmt, 0, sizeof(struct v4l2_format));
fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
fmt.fmt.pix.width = 1920;
fmt.fmt.pix.height = 1080;
fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_H264;
ret = ioctl(fd_vpu, VIDIOC_S_FMT, &fmt);
if (ret < 0) {
printf("Failed to set VPU format\n");
return -1;
}
// 初始化VPU解码器
memset(&dec_in, 0, sizeof(struct vpu_dec_in));
dec_in.src_buf = (char *)malloc(1024 * 1024);
dec_in.src_length = fread(dec_in.src_buf, 1, 1024 * 1024, fp_in);
dec_in.dst_buf = (char *)malloc(fmt.fmt.pix.width * fmt.fmt.pix.height * 3 / 2);
dec_in.dst_length = fmt.fmt.pix.width * fmt.fmt.pix.height * 3 / 2;
dec_in.keyframe = 1;
memset(&dec_out, 0, sizeof(struct vpu_dec_out));
dec_out.dst_buf_size = fmt.fmt.pix.width * fmt.fmt.pix.height * 3 / 2;
dec_out.dst_frames = 1;
dec_out.disp_flag = 0;
// 开始解码
ret = ioctl(fd_vpu, VPU_IOC_DEC_START, &dec_in);
if (ret < 0) {
printf("Failed to start decode\n");
return -1;
}
// 获取解码结果
ret = ioctl(fd_vpu, VPU_IOC_DEC_GET_RESULT, &dec_out);
if (ret < 0) {
printf("Failed to get decode result\n");
return -1;
}
// 保存解码后的图像
fwrite(dec_out.dst_buf, 1, dec_out.dst_buf_size, fp_out);
// 关闭文件和VPU设备
fclose(fp_in);
fclose(fp_out);
close(fd_vpu);
return 0;
}
```
在上述代码中,我们首先打开输入文件和输出文件,然后打开RK3399的VPU设备,使用 `ioctl()` 函数配置VPU解码器的输入和输出格式,并初始化解码器的输入和输出缓冲区。接着,我们使用 `ioctl()` 函数启动VPU解码器进行解码,并获取解码结果。最后,我们将解码后的图像保存到输出文件中,并关闭文件和VPU设备。需要注意的是,上述代码仅作为示例,实际应用中需要根据实际情况进行修改和优化。