stm32.LCD1602的使用
时间: 2023-06-17 18:09:05 浏览: 57
要使用STM32控制LCD1602液晶显示屏,需要将LCD1602与STM32连接起来,然后编写控制代码。
连接:
- 将LCD1602的VSS引脚连接到STM32的GND引脚。
- 将LCD1602的VDD引脚连接到STM32的+5V引脚。
- 将LCD1602的VO引脚连接到STM32的一个PWM输出引脚,用于控制液晶屏对比度。
- 将LCD1602的RS引脚连接到STM32的GPIO输出引脚。
- 将LCD1602的RW引脚连接到STM32的GND引脚。
- 将LCD1602的E引脚连接到STM32的GPIO输出引脚。
- 将LCD1602的D0-D7引脚连接到STM32的GPIO输出引脚。
编码:
下面是一个简单的示例代码,可以在STM32上控制LCD1602。
```c
#include "stm32f4xx.h"
#include "delay.h"
#define RS_ON GPIO_SetBits(GPIOA, GPIO_Pin_1)
#define RS_OFF GPIO_ResetBits(GPIOA, GPIO_Pin_1)
#define E_ON GPIO_SetBits(GPIOA, GPIO_Pin_2)
#define E_OFF GPIO_ResetBits(GPIOA, GPIO_Pin_2)
void LCD_Init(void);
void LCD_WriteCmd(uint8_t cmd);
void LCD_WriteData(uint8_t data);
void LCD_WriteString(char* str);
int main(void) {
// 初始化系统时钟和GPIO
// ...
LCD_Init();
while(1) {
LCD_WriteCmd(0x80); // 设置光标到第一行第一列
LCD_WriteString("Hello, world!"); // 写入字符串
DelayMs(1000); // 延时1秒
LCD_WriteCmd(0x01); // 清屏
DelayMs(1000); // 延时1秒
}
}
void LCD_Init(void) {
GPIO_InitTypeDef GPIO_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// 配置RS引脚为输出模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置E引脚为输出模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置D0-D7引脚为输出模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 |
GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 初始化LCD屏幕
DelayMs(15);
LCD_WriteCmd(0x38); // 8位数据总线,2行显示,5x8点阵字符
DelayMs(5);
LCD_WriteCmd(0x38); // 同上
DelayMs(1);
LCD_WriteCmd(0x38); // 同上
DelayMs(1);
LCD_WriteCmd(0x08); // 关闭显示
DelayMs(1);
LCD_WriteCmd(0x01); // 清屏
DelayMs(2);
LCD_WriteCmd(0x06); // 光标向右移动,不移动屏幕
DelayMs(1);
LCD_WriteCmd(0x0C); // 开启显示
DelayMs(1);
}
void LCD_WriteCmd(uint8_t cmd) {
RS_OFF; // RS=0,表示写入的是命令
E_ON; // E=1,使能写入
GPIO_Write(GPIOA, cmd << 3); // 将命令写入D0-D7引脚
DelayUs(10);
E_OFF; // E=0,禁止写入
DelayUs(100);
}
void LCD_WriteData(uint8_t data) {
RS_ON; // RS=1,表示写入的是数据
E_ON; // E=1,使能写入
GPIO_Write(GPIOA, data << 3); // 将数据写入D0-D7引脚
DelayUs(10);
E_OFF; // E=0,禁止写入
DelayUs(100);
}
void LCD_WriteString(char* str) {
while(*str) {
LCD_WriteData(*str++);
}
}
```
这个示例代码中,`LCD_Init`函数用于初始化LCD屏幕,`LCD_WriteCmd`函数用于向LCD屏幕发送命令,`LCD_WriteData`函数用于向LCD屏幕发送数据,`LCD_WriteString`函数用于向LCD屏幕发送字符串。在主函数中,先调用`LCD_Init`函数进行初始化,然后不断向LCD屏幕写入字符串并清屏。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)