IFX_INTERRUPT
时间: 2024-05-03 15:16:00 浏览: 18
IFX_INTERRUPT是一个在某些编程环境中使用的宏或常量,通常用于处理中断。中断是计算机硬件或操作系统在遇到特定事件(如外部信号、异常或程序错误)时自动处理的机制。IFX_INTERRUPT可能是在特定的库或框架中定义的,用于指示中断处理函数的入口点。
在具体的编程语言或环境中,IFX_INTERRUPT的用法可能会有所不同。如果你能提供更多的上下文信息,我可能能够给出更具体的答案。
相关问题
int itcs_timer_irq(int idx, void *arg) { timer_priv_t *timer_priv = (timer_priv_t *)arg; uint32_t tempregisr = 0; switch (timer_priv->timeridx) { case 1: tempregisr = readl(timer_priv->base + TIMER_ISR_C1); // printf("BEFORE READ COUNT1 ISR STAT RET :%08x\n",tempregisr); if (GET_BIT(tempregisr, 4) == 1) { // printf("OVERFLOW INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_OVERFLOW_INTERRUPT; } if (GET_BIT(tempregisr, 0) == 1) { g_endtime = get_timer(0); // printf("INTERVAL INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_INTERVAL_INTERRUPT; } if (GET_BIT(tempregisr, 1) == 1) { g_endtimematch1 = get_timer(0); // printf("MATCH1 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH1_INTERRUPT; } if (GET_BIT(tempregisr, 2) == 1) { g_endtimematch2 = get_timer(0); // printf("MATCH2 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH2_INTERRUPT; } if (GET_BIT(tempregisr, 3) == 1) { g_endtimematch3 = get_timer(0); // printf("MATCH3 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH3_INTERRUPT; } tempregisr = readl(timer_priv->base + TIMER_ISR_C1); // printf("AFTER READ COUNT1 ISR STAT RET :%08x\n",tempregisr); break; case 2: tempregisr = readl(timer_priv->base + TIMER_ISR_C2); // printf("BEFORE READ COUNT2 ISR STAT RET :%08x\n",tempregisr); if (GET_BIT(tempregisr, 4) == 1) { // printf("OVERFLOW INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_OVERFLOW_INTERRUPT; } if (GET_BIT(tempregisr, 0) == 1) { g_endtime = get_timer(0); // printf("INTERVAL INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_INTERVAL_INTERRUPT; } if (GET_BIT(tempregisr, 1) == 1) { // printf("MATCH1 INTERRUPT OCCUR\n"); g_endtimematch1 = get_timer(0); timer_priv->enum_interrupt = TIMER_MATCH1_INTERRUPT; } if (GET_BIT(tempregisr, 2) == 1) { g_endtimematch2 = get_timer(0); // printf("MATCH2 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH2_INTERRUPT; } if (GET_BIT(tempregisr, 3) == 1) { g_endtimematch3 = get_timer(0); // printf("MATCH3 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH3_INTERRUPT; } tempregisr = readl(timer_priv->base + TIMER_ISR_C2); // printf("AFTER READ COUNT2 ISR STAT RET :%08x\n",tempregisr); break; case 3: tempregisr = readl(timer_priv->base + TIMER_ISR_C3); // printf("BEFORE READ COUNT3 ISR STAT RET :%08x\n",tempregisr); if (GET_BIT(tempregisr, 4) == 1) { // printf("OVERFLOW INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_OVERFLOW_INTERRUPT; } if (GET_BIT(tempregisr, 0) == 1) { g_endtime = get_timer(0); // printf("INTERVAL INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_INTERVAL_INTERRUPT; } if (GET_BIT(tempregisr, 1) == 1) { g_endtimematch1 = get_timer(0); // printf("MATCH1 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH1_INTERRUPT; } if (GET_BIT(tempregisr, 2) == 1) { g_endtimematch2 = get_timer(0); // printf("MATCH2 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH2_INTERRUPT; } if (GET_BIT(tempregisr, 3) == 1) { g_endtimematch3 = get_timer(0); // printf("MATCH3 INTERRUPT OCCUR\n"); timer_priv->enum_interrupt = TIMER_MATCH3_INTERRUPT; } tempregisr = readl(timer_priv->base + TIMER_ISR_C3); // printf("AFTER READED COUNT3 ISR STAT RET :%08x\n",readregisr); break; default: break; } if (timer_priv->cb_event) { timer_priv->cb_event(timer_priv); } return 0; }
This code defines a function called "itcs_timer_irq" that handles interrupts for a timer. The function takes two parameters: an integer index "idx" and a void pointer "arg". The "arg" parameter is cast to a pointer to a "timer_priv_t" structure.
Inside the function, there is a switch statement that selects which timer to read the interrupt status register for. Depending on which bits are set in the register, the function sets a corresponding interrupt type in the "enum_interrupt" member of the "timer_priv" structure. Additionally, the function updates global variables "g_endtime", "g_endtimematch1", "g_endtimematch2", or "g_endtimematch3" based on which bits are set in the register.
After handling the interrupt, the function calls a callback function "cb_event" if it is set in the "timer_priv" structure.
The function returns 0.
libusb_interrupt_transfer的用法
libusb_interrupt_transfer是一个函数,用于执行USB中断传输。它的原型如下:
```
int libusb_interrupt_transfer(
struct libusb_device_handle *dev_handle, // 设备句柄
unsigned char endpoint, // 端点ID
unsigned char *data, // 数据缓冲区
int length, // 数据长度
int *transferred, // 实际传输数据长度
unsigned int timeout // 超时时间
);
```
参数说明:
- dev_handle:表示USB设备的句柄,可以通过libusb_open()或者libusb_open_device_with_vid_pid()函数获得;
- endpoint:表示要进行传输的USB端点,它由端点地址和方向组成;
- data:表示数据缓冲区的指针;
- length:表示数据缓冲区的长度;
- transferred:表示实际传输的数据长度,由函数返回;
- timeout:表示等待传输完成的超时时间,单位是毫秒。
函数返回值:
- 0:表示传输成功;
- 其他值:表示传输失败。
使用libusb_interrupt_transfer函数进行USB传输的步骤如下:
1. 打开USB设备并获取设备句柄;
2. 设置USB端点的方向和地址;
3. 分配数据缓冲区;
4. 调用libusb_interrupt_transfer函数进行数据传输;
5. 检查传输是否成功,并获取传输的数据长度;
6. 释放数据缓冲区;
7. 关闭USB设备。
示例代码:
```
#include <stdio.h>
#include <stdlib.h>
#include <libusb-1.0/libusb.h>
#define VENDOR_ID 0x1234
#define PRODUCT_ID 0x5678
#define ENDPOINT_IN 0x81
#define ENDPOINT_OUT 0x02
#define MAX_PACKET_SIZE 64
int main()
{
libusb_device_handle *dev_handle;
int transferred;
unsigned char data[MAX_PACKET_SIZE];
int ret;
// 初始化libusb库
ret = libusb_init(NULL);
if (ret != 0) {
printf("libusb_init failed: %d\n", ret);
return -1;
}
// 打开USB设备并获取设备句柄
dev_handle = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
if (dev_handle == NULL) {
printf("libusb_open_device_with_vid_pid failed\n");
libusb_exit(NULL);
return -1;
}
// 设置USB端点
ret = libusb_claim_interface(dev_handle, 0);
if (ret != 0) {
printf("libusb_claim_interface failed: %d\n", ret);
libusb_close(dev_handle);
libusb_exit(NULL);
return -1;
}
// 分配数据缓冲区
unsigned char *buffer = (unsigned char *)malloc(MAX_PACKET_SIZE);
if (buffer == NULL) {
printf("malloc failed\n");
libusb_release_interface(dev_handle, 0);
libusb_close(dev_handle);
libusb_exit(NULL);
return -1;
}
// 向设备发送数据
buffer[0] = 0x01;
buffer[1] = 0x02;
ret = libusb_interrupt_transfer(dev_handle, ENDPOINT_OUT, buffer, 2, &transferred, 1000);
if (ret != 0) {
printf("libusb_interrupt_transfer failed: %d\n", ret);
free(buffer);
libusb_release_interface(dev_handle, 0);
libusb_close(dev_handle);
libusb_exit(NULL);
return -1;
}
// 从设备接收数据
ret = libusb_interrupt_transfer(dev_handle, ENDPOINT_IN, data, MAX_PACKET_SIZE, &transferred, 1000);
if (ret != 0) {
printf("libusb_interrupt_transfer failed: %d\n", ret);
free(buffer);
libusb_release_interface(dev_handle, 0);
libusb_close(dev_handle);
libusb_exit(NULL);
return -1;
}
// 输出接收到的数据
printf("received data: ");
for (int i = 0; i < transferred; i++) {
printf("%02x ", data[i]);
}
printf("\n");
// 释放数据缓冲区
free(buffer);
// 释放设备接口
libusb_release_interface(dev_handle, 0);
// 关闭USB设备
libusb_close(dev_handle);
// 退出libusb库
libusb_exit(NULL);
return 0;
}
```