void Enter_RESET_MODE(void)//软件复位模式,复位 program registers { ADS8688_WriteCmdReg(RST); } void Set_CH_Range_Select(uint16_t ch,uint16_t range) //设置各个通道的范围 { ADS8688_WriteProgramRegister(ch,range); }
时间: 2024-04-13 11:26:41 浏览: 13
收到你分享的代码。这段代码包含了两个函数:`Enter_RESET_MODE()` 和 `Set_CH_Range_Select()`。
`Enter_RESET_MODE()` 函数用于进入软件复位模式,该模式将复位ADS8688的程序寄存器。函数内部调用了 `ADS8688_WriteCmdReg()` 函数,传入了一个命令 `RST`,用于写入ADS8688的命令寄存器,以触发软件复位操作。
`Set_CH_Range_Select()` 函数用于设置各个通道的范围。函数接受两个参数:`ch` 和 `range`,分别表示通道号和范围。函数内部调用了 `ADS8688_WriteProgramRegister()` 函数,将通道号和范围作为参数传递给该函数,以向ADS8688的程序寄存器写入相应的值。
这两个函数提供了设置ADS8688工作模式和通道范围的功能。如果你有关于这些函数的问题或者需要进一步的帮助,请告诉我。
相关问题
void Enter_RESET_MODE(void)//软件复位模式,复位 program registers { ADS8688_WriteCmdReg(RST); }
这段代码定义了一个名为 `Enter_RESET_MODE` 的函数,用于将 ADS8688 设备设置为软件复位模式,以复位程序寄存器。
函数内部执行以下操作:
1. 调用 `ADS8688_WriteCmdReg` 函数,将命令 `RST` 作为参数传递给该函数。
2. `ADS8688_WriteCmdReg` 函数将命令发送给 ADS8688 设备的命令寄存器,以执行软件复位操作。
通过调用 `Enter_RESET_MODE` 函数,可以将 ADS8688 设备设置为软件复位模式,并复位其程序寄存器。请注意,在使用此函数之前,需要确保已正确初始化 ADS8688 设备和相关引脚的状态。如果还有其他问题,请随时提问。
void telescopicmotor_drivr_init (void)
As an AI language model, I am not familiar with the context of your code. However, based on the function name, "telescopicmotor_drivr_init" seems to be an initialization function for a motor driver that controls a telescopic mechanism. The function is likely used to set up the motor driver's pins, registers, and other parameters to enable the driver to control the motor. The specific implementation of the function may vary depending on the hardware and software used.