内核驱动模块怎么添加GPL协议
时间: 2023-07-31 14:09:27 浏览: 59
添加GPL协议的步骤如下:
1. 确认你的内核驱动模块代码符合GPL协议的要求,即所有的源代码都必须公开,且任何人都可以自由地使用、修改和传播该代码。
2. 在你的代码中添加GPL协议声明,通常在代码文件的开头或结尾处添加一段注释,如下所示:
```
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
```
3. 确认你的代码中依赖的其他代码是否也符合GPL协议要求,如果不符合,则需要将其替换为符合要求的代码。
4. 如果你的代码中使用了其他开源项目的代码,则需要确认该项目的许可证是否与GPL协议兼容。如果不兼容,则需要重新编写代码或者获得许可证。
5. 最后,将你的代码发布到开源社区,让其他人自由地使用、修改和传播该代码。
相关问题
linux 内核驱动模块怎么添加GPL协议
如果你想将你的 Linux 内核驱动模块添加 GPL 协议,可以按照以下步骤进行:
1. 确认你的代码符合 GPL 协议的要求。
2. 在你的代码中添加 GPL 协议声明,可以在代码文件的开头处加入类似这样的声明:
```
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
```
3. 在代码文件中加入 GPLv2 或 GPLv2+ 的条款文本,可以参考 GNU 官方网站上的条款文本。
4. 在 Makefile 文件中添加 GPL 协议声明,可以在文件开头处加入类似这样的声明:
```
# SPDX-License-Identifier: GPL-2.0
```
这里的 SPDX-License-Identifier 是一个标识符,用于唯一标识你的代码所使用的协议。GPL-2.0 表示使用 GPL 2.0 版本协议。
5. 编译你的驱动模块,生成相应的 .ko 文件。
6. 在发布你的代码时,需要同时提供 GPL 协议的文本和代码的源代码。
注意事项:
- 如果你的代码是基于其他 GPL 协议的代码修改而来,那么你需要在代码中注明原来的代码版本,并在代码中加入适当的修改说明。
- 如果你的代码中使用了其他开源软件的代码或库,需要遵守这些软件的开源协议。
linux kernel 符合GPL协议的驱动文件怎么使用drm_of.c中定义的EXPORT_SYMBOL_GPL(drm_of_lvds_get_dual_link_pixel_order);
EXPORT_SYMBOL_GPL是一个宏,用于将符号(symbol)暴露给其他模块使用。在Linux内核中,符号是指函数、变量或常量等。EXPORT_SYMBOL_GPL的作用是将符号标记为只能由GPL协议模块使用,这意味着只有使用GPL协议的模块才能使用该符号。
在使用EXPORT_SYMBOL_GPL(drm_of_lvds_get_dual_link_pixel_order)之前,需要确保该符号已经被定义。在drm_of.c文件中,该符号已经被定义为一个函数。如果你想在其他GPL协议的模块中使用该函数,可以在模块代码中使用extern声明该符号,然后就可以像使用其他函数一样使用它了。例如:
```c
#include <linux/module.h>
#include <linux/drm/drmP.h>
extern int drm_of_lvds_get_dual_link_pixel_order(struct device_node *np);
static int my_module_init(void)
{
struct device_node *np;
int pixel_order;
/* 获取设备节点 */
np = of_find_node_by_name(NULL, "lvds");
if (!np) {
pr_err("Failed to find lvds node\n");
return -ENODEV;
}
/* 调用drm_of_lvds_get_dual_link_pixel_order函数 */
pixel_order = drm_of_lvds_get_dual_link_pixel_order(np);
pr_info("Dual link pixel order: %d\n", pixel_order);
/* 释放设备节点 */
of_node_put(np);
return 0;
}
static void my_module_exit(void)
{
/* 模块退出时的清理工作 */
}
module_init(my_module_init);
module_exit(my_module_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("My Linux kernel module");
```