GD32的485串口通信
时间: 2024-01-13 21:03:55 浏览: 49
GD32是一款基于ARM Cortex-M3内核的微控制器系列,它提供了丰富的外设和功能,包括串口USART和RS485通信。下面是一个GD32的485串口通信的示例代码:
首先,需要包含相关的头文件和定义一些变量:
```c
#include "gd32f30x.h"
#include "usart_rs485.h"
#define BUFFER_SIZE 100
uint8_t send_buf[] = "Hello, RS485!";
uint8_t receive_buf[BUFFER_SIZE];
```
然后,需要进行硬件初始化和串口初始化:
```c
void rs485_hw_init(void)
{
/* 配置GPIO引脚 */
rcu_periph_clock_enable(RCU_GPIOA);
gpio_mode_set(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_8);
gpio_output_options_set(GPIOA GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_8);
/* 配置引脚 */
rcu_periph_clock_enable(RCU_USART0);
_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_9 | GPIO_PIN_10);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_9 | GPIO_PIN_10);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9 | GPIO_PIN_10);
usart_deinit(USART0);
}
void rs485_usart_init(void)
{
/* 配置USART参数 */
usart_baudrate_set(USART0, 9600);
usart_parity_config(USART0, USART_PM_NONE);
usart_word_length_set(USART0, USART_WL_8BIT);
usart_stop_bit_set(USART0, USART_STB_1BIT);
usart_hardware_flow_rts_config(USART0, USART_RTS_DISABLE);
usart_hardware_flow_cts_config(USART0, USART_CTS_DISABLE);
usart_receive_config(USART0, USART_RECEIVE_ENABLE);
usart_transmit_config(USART0, USART_TRANSMIT_ENABLE);
usart_enable(USART0);
}
```
接下来,可以在主函数中进行通信操作:
```c
int main(void)
{
/* 硬件初始化 */
rs485_hw_init();
/* 串口初始化 */
rs485_usart_init();
while(1)
{
/* 发送数据 */
usart_data_transmit(USART0, send_buf);
/* 接收数据 */
usart_data_receive(USART0, receive_buf, BUFFER_SIZE);
/* 处理接收到的数据 */
// ...
/* 延时一段时间 */
delay_1ms(1000);
}
}
```
以上是一个简单的GD32的485串口通信的示例代码。你可以根据实际需求进行修改和扩展。