void Buzzer_Sound(u8 );蜂鸣器延时10秒发声程序设计
时间: 2023-12-03 12:45:03 浏览: 47
以下是基于STM32的程序设计:
```c
#include "stm32f10x.h"
void Buzzer_Sound(u8 frequency) {
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
int delay_time = 10000000; // 延时十秒
int count = 0;
while (count < delay_time) {
GPIO_SetBits(GPIOA, GPIO_Pin_0);
for (int i = 0; i < frequency; i++) {
for (int j = 0; j < 100; j++); // 发声持续时间
}
GPIO_ResetBits(GPIOA, GPIO_Pin_0);
count++;
}
}
int main() {
Buzzer_Sound(100); // 发声频率为100
return 0;
}
```
需要注意的是,这个程序只在单片机上实现了发声功能,若要在电路上实现,需要根据具体的电路设计进行调整。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)