AttributeError: 'ModbusSerialClient' object has no attribute 'transport'
时间: 2023-10-10 14:07:02 浏览: 19
这个问题可能是因为你在使用 ModbusSerialClient 对象的时候,尝试访问了它没有的属性 transport。请确认你的代码中是否正确地创建了 ModbusSerialClient 对象,并且对它进行了正确的操作。同时,也请检查你在使用此对象时是否有输入错误,如是否正确地引用了对象名称等。如果仍然无法解决问题,请提供更多的代码和错误信息以便更好地帮助你。
相关问题
AttributeError: 'ModbusSerialClient' object has no attribute '_transport'
非常抱歉,我的之前的回答仍然存在错误。在 `ModbusSerialClient` 中,也没有名为 `_transport` 的属性。正确的方法是使用 `ModbusSerialClient` 对象的 `_framer` 属性来获取完整的 Modbus 报文。以下是修改后的示例代码:
```python
from pymodbus.client.sync import ModbusSerialClient
from pymodbus.constants import Endian
from pymodbus.payload import BinaryPayloadDecoder
# 创建Modbus串口客户端
client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
# 连接到Modbus设备
client.connect()
# 读取Modbus信号
response = client.read_holding_registers(address=0, count=2, unit=1)
# 解码Modbus信号
decoder = BinaryPayloadDecoder.fromRegisters(response.registers, Endian.Big)
data = decoder.decode_32bit_float()
# 获取完整的Modbus报文
full_message = client._framer.buffer
# 断开Modbus连接
client.close()
```
在这个示例代码中,我们使用了 `_framer.buffer` 属性来获取完整的 Modbus 报文。请注意,这仍然是一个私有属性,使用时请谨慎考虑。
AttributeError: 'ModbusSerialClient' object has no attribute 'last_request'
`'ModbusSerialClient' object has no attribute 'last_request'` 错误通常是因为 pymodbus 的版本更新导致 API 发生了变化。在新版本的 pymodbus 中,`ModbusSerialClient` 对象没有 `last_request` 属性了。要获取 Modbus RTU 报文,你可以使用 `ModbusSerialClient` 对象的 `transport` 属性,获取底层的 `serial` 对象,然后使用 `serial` 对象的 `in_waiting` 和 `read` 方法读取串口数据。以下是一个示例代码,可以帮助你获取完整的 Modbus RTU 报文:
```python
from pymodbus.client.sync import ModbusSerialClient
from pymodbus.transaction import ModbusRtuFramer
client = ModbusSerialClient(
port='/dev/ttyUSB0', # 串口号
baudrate=9600, # 波特率
timeout=2, # 超时时间
framer=ModbusRtuFramer(),
)
client.connect() # 连接 Modbus Slave 设备
# 读取保持寄存器
result = client.read_holding_registers(
address=0, # 寄存器地址
count=1, # 寄存器数量
unit=1, # Slave 设备地址
)
# 获取完整的 Modbus RTU 报文
transport = client.transport
response_data = transport.serial.in_waiting # 获取串口缓冲区中的数据量
response = transport.serial.read(response_data) # 读取完整的 Modbus RTU 响应报文
request = transport.framer.buildPacket(client.transaction_id, client.address, result)
print('Request: ', request)
print('Response: ', response)
client.close() # 断开与 Modbus Slave 设备的连接
```
在这个示例代码中,我们使用 `client.transport` 属性获取 ModbusSerialClient 对象的底层 `ModbusSerialTransport` 对象,然后使用 `transport.serial.in_waiting` 方法获取串口缓冲区中的数据量,使用 `transport.serial.read` 方法读取完整的 Modbus RTU 响应报文。同时,我们使用 `transport.framer.buildPacket` 方法构建 Modbus RTU 请求报文。你可以根据需要修改这个示例代码,以适应你的应用场景。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![py](https://img-home.csdnimg.cn/images/20210720083646.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![png](https://img-home.csdnimg.cn/images/20210720083516.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)