flash driver module
时间: 2023-11-01 08:02:48 浏览: 43
Flash driver module(也称为闪存驱动模块)是一种硬件设备,用于读取和写入闪存存储器,例如USB闪存驱动器。它通常由控制器芯片、存储IC和连接接口组成。
控制器芯片是闪存驱动模块的核心,它执行各种操作,并与主机系统进行通信。它可以处理文件系统和数据管理,并确保闪存存储器的可靠性和稳定性。
存储IC(Integrated Circuit,集成电路)是实际存储数据的部分。闪存驱动模块可以使用不同类型的闪存存储器,如NAND闪存或NOR闪存,具体取决于设备的要求和性能。
连接接口是与主机系统进行通信的通道。常见的连接接口包括USB(通常用于USB闪存驱动器)、SATA(通常用于固态硬盘)和PCIe(通常用于高性能存储设备)等。接口的选择会影响数据传输速度和设备的兼容性。
闪存驱动模块的主要功能是读取和写入数据。用户可以将文件、文档、照片、视频等存储在闪存驱动模块中,并通过连接接口将其传输到其他设备或计算机上。闪存驱动模块通常具有高速传输速度,方便携带,并具备较大的存储容量。
总而言之,闪存驱动模块是一种常见的存储设备,可以方便地读取和写入闪存存储器。它在计算机、移动设备和其他电子设备中得到广泛应用,为用户提供了便携式存储和数据传输的解决方案。
相关问题
spi flash读写驱动程序实例
以下是一个简单的SPI Flash读写驱动程序示例,使用的是Linux内核自带的SPI驱动接口。
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define FLASH_PAGE_SIZE 256
#define FLASH_SECTOR_SIZE 4096
#define FLASH_BLOCK_SIZE 65536
struct spi_flash {
struct mtd_info mtd;
struct spi_device *spi;
};
static int spi_flash_probe(struct spi_device *spi)
{
struct spi_flash *flash;
struct mtd_partition *parts;
int nparts, err;
flash = kzalloc(sizeof(struct spi_flash), GFP_KERNEL);
if (!flash) {
dev_err(&spi->dev, "Failed to allocate memory for spi_flash\n");
return -ENOMEM;
}
flash->spi = spi;
/* Set up MTD structure */
flash->mtd.name = spi->modalias;
flash->mtd.owner = THIS_MODULE;
flash->mtd.type = MTD_NORFLASH;
flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.erasesize = FLASH_BLOCK_SIZE;
flash->mtd.writesize = FLASH_PAGE_SIZE;
flash->mtd.writebufsize = FLASH_PAGE_SIZE;
/* Register MTD device */
err = mtd_device_register(&flash->mtd, NULL, 0);
if (err) {
dev_err(&spi->dev, "Failed to register MTD device, error %d\n", err);
kfree(flash);
return err;
}
/* Set up partition table */
nparts = get_mtd_device_partitions(&flash->mtd, &parts, 0);
if (nparts <= 0) {
dev_err(&spi->dev, "Failed to create partition table\n");
mtd_device_unregister(&flash->mtd);
kfree(flash);
return -EINVAL;
}
/* Print information about the device */
dev_info(&spi->dev, "SPI Flash device detected, %d partitions.\n", nparts);
dev_info(&spi->dev, "Flash device size %llu bytes, erase size %d bytes, write size %d bytes.\n",
(unsigned long long)flash->mtd.size, flash->mtd.erasesize, flash->mtd.writesize);
return 0;
}
static int spi_flash_remove(struct spi_device *spi)
{
struct spi_flash *flash = spi_get_drvdata(spi);
mtd_device_unregister(&flash->mtd);
kfree(flash);
return 0;
}
static const struct of_device_id spi_flash_of_match[] = {
{ .compatible = "spansion, s25fl064k", },
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, spi_flash_of_match);
static struct spi_driver spi_flash_driver = {
.driver = {
.name = "spi_flash",
.owner = THIS_MODULE,
.of_match_table = spi_flash_of_match,
},
.probe = spi_flash_probe,
.remove = spi_flash_remove,
};
static int __init spi_flash_init(void)
{
return spi_register_driver(&spi_flash_driver);
}
static void __exit spi_flash_exit(void)
{
spi_unregister_driver(&spi_flash_driver);
}
module_init(spi_flash_init);
module_exit(spi_flash_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Your Name");
MODULE_DESCRIPTION("SPI Flash driver");
MODULE_ALIAS("spi:spi_flash");
以上代码定义了一个名为spi_flash的驱动程序,它基于Linux内核自带的SPI驱动接口,并提供了一个MTD设备,可以进行SPI Flash的读写操作。在probe函数中,驱动程序会初始化MTD设备,并创建分区表。在remove函数中,驱动程序会注销MTD设备。在spi_flash_init函数中,驱动程序会注册SPI驱动程序。在spi_flash_exit函数中,驱动程序会注销SPI驱动程序。
Linux下常用的spi flash驱动程序demo
以下是一个Linux下常用的SPI Flash驱动程序demo,供参考:
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define SPINOR_OP_RDID 0x9f
struct spinor_chip {
struct spi_device *spi;
struct mtd_info *mtd;
};
static int spinor_read_id(struct spinor_chip *chip, u8 *id)
{
struct spi_transfer t = {
.tx_buf = &SPINOR_OP_RDID,
.rx_buf = id,
.len = 3,
};
struct spi_message m;
spi_message_init(&m);
spi_message_add_tail(&t, &m);
return spi_sync(chip->spi, &m);
}
static int spinor_probe(struct spi_device *spi)
{
struct spinor_chip *chip;
int ret;
u8 id[3];
chip = devm_kzalloc(&spi->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->spi = spi;
ret = spinor_read_id(chip, id);
if (ret)
return ret;
spi_set_drvdata(spi, chip);
chip->mtd = mtd_device_parse_register(&spi->dev, NULL, NULL, NULL, 0, NULL);
if (IS_ERR(chip->mtd)) {
dev_err(&spi->dev, "failed to register MTD device\n");
return PTR_ERR(chip->mtd);
}
return 0;
}
static int spinor_remove(struct spi_device *spi)
{
struct spinor_chip *chip = spi_get_drvdata(spi);
mtd_device_unregister(chip->mtd);
return 0;
}
static const struct of_device_id spinor_of_match[] = {
{ .compatible = "spi-flash" },
{ },
};
MODULE_DEVICE_TABLE(of, spinor_of_match);
static struct spi_driver spinor_driver = {
.driver = {
.name = "spinor",
.owner = THIS_MODULE,
.of_match_table = spinor_of_match,
},
.probe = spinor_probe,
.remove = spinor_remove,
};
module_spi_driver(spinor_driver);
MODULE_AUTHOR("Your Name");
MODULE_LICENSE("GPL");