linux kernel使用 I2C_FUNC_SMBUS_BLOCK_PROC_CALL 先写command code 再读设备温度 实例
时间: 2023-07-31 08:08:58 浏览: 49
好的,我来回答你的问题。
首先,需要在代码中定义 I2C 设备的地址和 SMBus command code。例如,假设我们要读取地址为 0x48 的 TMP102 温度传感器的温度值,其 SMBus command code 为 0x00。
```
#define TMP102_ADDR 0x48
#define TMP102_CMD_TEMP 0x00
```
接着,通过 i2c_smbus_write_byte 函数向设备写入 command code。由于我们需要读取 2 字节的温度值,需要使用 I2C_FUNC_SMBUS_BLOCK_PROC_CALL 功能,即先写 command code 再读取数据块。
```
int file;
char buf[2];
int temperature;
file = open("/dev/i2c-1", O_RDWR);
ioctl(file, I2C_SLAVE, TMP102_ADDR);
if (i2c_smbus_write_byte(file, TMP102_CMD_TEMP) < 0) {
printf("Error writing command code\n");
exit(1);
}
if (i2c_smbus_read_i2c_block_data(file, TMP102_CMD_TEMP, 2, buf) < 0) {
printf("Error reading temperature\n");
exit(1);
}
temperature = (buf[0] << 8 | buf[1]) >> 4;
printf("Temperature = %.2f C\n", temperature * 0.0625);
```
以上代码中,我们首先打开 I2C 设备文件 /dev/i2c-1,并设置 TMP102 设备地址为从设备地址。然后,通过 i2c_smbus_write_byte 函数向设备写入 command code。最后,通过 i2c_smbus_read_i2c_block_data 函数读取 2 字节的温度值,并将其转换为摄氏度。