sd_ble_gap_phy_update
时间: 2023-09-11 13:08:33 浏览: 50
sd_ble_gap_phy_update是一条用于更新BLE(蓝牙低功耗)连接的物理层的命令。它是Nordic Semiconductor提供的一个函数,用于更新BLE连接的物理层参数。通过调用这个函数,可以改变BLE连接的传输速率和传输功率等参数,以适应不同的通信需求。
这条命令的具体使用方式可以参考Nordic Semiconductor提供的文档和示例代码。在调用这个函数之前,需要先初始化BLE协议栈,并建立BLE连接。然后通过传入相应的参数,即可更新BLE连接的物理层参数。
需要注意的是,该命令的使用需要在正确的上下文环境下,并且需要了解相关的BLE协议和硬件限制。确保在使用之前,先进行适当的测试和验证,以确保功能和性能符合预期。
相关问题
NRF5函数sd_ble_gap_appearance_set
函数说明:设置设备外观
函数原型:
uint32_t sd_ble_gap_appearance_set(uint16_t appearance)
参数说明:
appearance:设备外观编码,详见官方文档
返回值:
返回NRF_ERROR_INVALID_PARAM表示参数无效,否则返回NRF_SUCCESS
函数作用:
用于设置设备的外观编码,可以用于标识设备类型、功能等信息,方便其他设备识别。
注意事项:
1. 外观编码必须在官方文档中规定的范围内。
2. 设置外观编码应在连接之前完成。
3. 该函数只能在SoftDevice中调用。
NRF5 BLE_GAP_EVT_PHY_UPDATE_REQUEST
NRF5 BLE_GAP_EVT_PHY_UPDATE_REQUEST is an event that occurs when the BLE stack requests a PHY (physical layer) update from the remote device. PHY is the layer in the Bluetooth Low Energy stack that determines the physical characteristics of the communication link, such as data rate and signal strength. The PHY update request event is triggered when the remote device requests a change in the PHY parameters, such as increasing the data rate or changing the modulation scheme. This event provides an opportunity for the application to accept or reject the PHY update request. If the application accepts the request, the BLE stack will update the PHY parameters and notify the remote device of the change. If the application rejects the request, the BLE stack will continue to use the current PHY parameters.