数据结构GPIO_InitStructure中的GPIOseed有几个定义的枚举元素
时间: 2023-05-27 07:04:56 浏览: 70
GPIO_InitStructure中没有GPIOseed这个成员,可能是指GPIO_InitTypeDef中的GPIO_Speed成员。GPIO_Speed是一个枚举类型,有以下几个定义的枚举元素:
- GPIO_Speed_10MHz:GPIO输出速率为10MHz
- GPIO_Speed_2MHz:GPIO输出速率为2MHz
- GPIO_Speed_50MHz:GPIO输出速率为50MHz
相关问题
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); GPIO_InitTypeDef GPIO_InitStructure; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_Init(GPIOB, &GPIO_InitStructure);的hal库写法
以下是使用HAL库的代码示例,用于初始化GPIOB的引脚8和引脚9为开漏输出模式,并设置引脚速度为50MHz:
```c
/* 使能GPIOB的时钟 */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
/* 定义GPIO初始化结构体 */
GPIO_InitTypeDef GPIO_InitStructure;
/* 配置引脚8 */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
/* 配置引脚9 */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
```
在上述示例中,首先使用`RCC_APB2PeriphClockCmd`函数使能GPIOB的时钟。然后,定义一个`GPIO_InitTypeDef`结构体`GPIO_InitStructure`来配置GPIO引脚的初始化参数。接下来,设置引脚8和引脚9的初始化参数,并使用`HAL_GPIO_Init`函数初始化这两个引脚。
注意,上述代码假设你已经包含了相关的头文件,并且已经正确配置了系统时钟。
void EPD_GPIO_Init(void) { GPIO_InitTypeDef GPIO_InitStructure; RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9; //Port configuration GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5|GPIO_Pin_6; //Port configuration GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; //Pull up input GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); //Initialize GPIO }
这段代码是对电子纸屏幕的GPIO引脚进行初始化。与之前的代码相比,这段代码省略了对LED引脚的配置。
首先,通过RCC_APB2PeriphClockCmd函数开启GPIOB的时钟。
然后,配置CS、SCK和SDO引脚(PB7、PB8和PB9)。将GPIO_InitStructure的GPIO_Pin成员设置为GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9,表示要配置的引脚。将GPIO_InitStructure的GPIO_Mode成员设置为GPIO_Mode_Out_PP,表示将引脚设置为推挽输出模式。将GPIO_InitStructure的GPIO_Speed成员设置为GPIO_Speed_2MHz,表示引脚的输出速度为2MHz。最后,调用GPIO_Init函数进行配置。
接下来,配置D/C和RES引脚(PB5和PB6)。将GPIO_InitStructure的GPIO_Pin成员设置为GPIO_Pin_5|GPIO_Pin_6。将GPIO_InitStructure的GPIO_Mode成员设置为GPIO_Mode_Out_PP,表示将引脚设置为推挽输出模式。将GPIO_InitStructure的GPIO_Speed成员设置为GPIO_Speed_2MHz,表示引脚的输出速度为2MHz。最后,调用GPIO_Init函数进行配置。
然后,配置BUSY引脚(PB4)。将GPIO_InitStructure的GPIO_Pin成员设置为GPIO_Pin_4。将GPIO_InitStructure的GPIO_Mode成员设置为GPIO_Mode_IPU,表示将引脚设置为上拉输入模式。将GPIO_InitStructure的GPIO_Speed成员设置为GPIO_Speed_2MHz,表示引脚的输入速度为2MHz。最后,调用GPIO_Init函数进行配置。
这样,电子纸屏幕的GPIO引脚就完成了初始化。