mq2烟雾传感器stm32F103代码
时间: 2023-09-06 08:08:09 浏览: 54
以下是一个简单的MQ2烟雾传感器的STM32F103代码:
```c
#include "stm32f10x.h"
#define MQ2_ADC_CHANNEL 1
#define MQ2_ADC_CLK RCC_APB2Periph_ADC1
#define MQ2_ADC_PORT GPIOA
#define MQ2_ADC_PIN GPIO_Pin_1
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
void ADC_Config(void)
{
RCC_APB2PeriphClockCmd(MQ2_ADC_CLK, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_Cmd(ADC1, ENABLE);
GPIO_InitStructure.GPIO_Pin = MQ2_ADC_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(MQ2_ADC_PORT, &GPIO_InitStructure);
ADC_RegularChannelConfig(ADC1, MQ2_ADC_CHANNEL, 1, ADC_SampleTime_55Cycles5);
}
int main(void)
{
uint16_t adc_value;
ADC_Config();
while(1)
{
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
while(!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC));
adc_value = ADC_GetConversionValue(ADC1);
// Do something with the adc_value
}
}
```
这个代码中,我们使用了STM32的ADC模块来读取MQ2烟雾传感器的模拟输出值。具体来说,我们设置了ADC通道1对应的GPIO口为模拟输入,然后使用了ADC的轮询模式来读取模拟值,并将其存储在一个`uint16_t`类型的变量中。最后,我们可以根据读到的值来判断烟雾的浓度等级,或者将其发送到其他设备进行处理。