写一段stm32f103c8t6的io初始化,io为pb5,功能为按键输入
时间: 2024-05-15 22:18:16 浏览: 22
好的,这是一个典型的STM32F103C8T6的IO初始化代码,可以实现PB5引脚作为按键输入的功能:
```
void GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIOB clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
/* Configure PB5 as input */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
}
```
在这段代码中,我们首先使能了GPIOB的时钟,然后对PB5进行了初始化,设置为输入模式,输入电平为浮空状态,输入速度为50MHz。这样就可以通过读取PB5的输入状态来实现按键的输入功能了。
相关问题
写一段stm32f103c8t6的io初始化,io为pb5,功能为按键输入,写出他的.c和.h
很高兴为您解答问题!以下是STM32F103C8T6的IO初始化,IO为PB5,用作按键输入的代码:
**.h文件**
```c
#ifndef __IO_INIT_H
#define __IO_INIT_H
#include "stm32f10x.h"
#define KEY_DOWN 1 // 定义按键按下的宏值
#define KEY_UP 0 // 定义按键松开的宏值
#define KEY_PORT GPIOB // 按键端口
#define KEY_PIN GPIO_Pin_5 // 按键引脚
#define KEY_DOWN_State GPIO_ReadInputDataBit(KEY_PORT, KEY_PIN) // 判断按键状态
void Key_GPIO_Init(void); // 按键IO初始化函数
#endif
```
**.c文件**
```c
#include "io_init.h"
/**
* @brief 按键IO初始化函数
* @param None
* @retval None
*/
void Key_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); // 开启GPIOB时钟
GPIO_InitStructure.GPIO_Pin = KEY_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; // 上拉输入模式
GPIO_Init(KEY_PORT, &GPIO_InitStructure);
}
```
该初始化代码使用了STM32F10x的GPIO库函数,通过上拉输入模式将IO初始化为按键输入功能。在.h文件中,定义了按键端口、引脚,以及按键按下和松开的宏值。在.c文件中,实现了按键IO初始化函数。
写一段stm32f103c8t6的io初始化,io为pb5,功能为按键输入,写出他的.c和.h,并且写一个调用函数
好的,请稍等,让我整理一下。
以下是stm32f103c8t6的io初始化代码:
.h文件:
```c
#ifndef __IO_INIT_H
#define __IO_INIT_H
#include "stm32f10x.h"
#define KEY_GPIO_PORT GPIOB
#define KEY_GPIO_CLK RCC_APB2Periph_GPIOB
#define KEY_GPIO_PIN GPIO_Pin_5
void key_init(void);
#endif /* __IO_INIT_H */
```
.c文件:
```c
#include "io_init.h"
void key_init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(KEY_GPIO_CLK, ENABLE);
GPIO_InitStructure.GPIO_Pin = KEY_GPIO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(KEY_GPIO_PORT, &GPIO_InitStructure);
}
```
这个代码是用来初始化PB5这个按键输入口的。
调用函数:
在你的代码中调用key_init()函数就可以了。这个函数会初始化PB5为按键输入。
注意:这段代码可能会因为不同的开发板上的布局有所不同,需要修改成相应的GPIO口以使其在您的开发板上能够正确使用。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)