请写一个STM32F103的串口发送数据程序
时间: 2023-06-03 13:03:32 浏览: 68
好的,这是一个简单的STM32F103串口发送数据的程序示例:
```
#include "stm32f10x.h"
int main(void)
{
// 初始化串口1
USART_InitTypeDef USART_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
// 发送数据
char message[] = "Hello world!";
for(int i=0; i<strlen(message); i++) {
USART_SendData(USART1, message[i]);
while(USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
}
while(1); // 程序不退出
}
```
这个程序初始化了串口1,并发送了一个字符串 "Hello world!" 到串口。串口通信的波特率是9600,串口的引脚是GPIOA_Pin_9。完成发送后程序会阻塞在 while(1) 循环里,不会退出。
请注意,这只是一个示例程序,实际应用时需要根据具体的需求进行修改。