i2c代码
时间: 2023-07-02 13:11:31 浏览: 60
I2C是一种串行通信协议,常用于连接芯片和传感器。在Linux系统中,可以通过i2c-dev驱动程序来控制I2C总线。以下是使用i2c-dev驱动程序在Linux中进行I2C通信的示例代码:
```c
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#define I2C_ADDR 0x68
#define REG_ADDR 0x00
int main()
{
int fd;
char buf[2];
// 打开I2C设备文件
fd = open("/dev/i2c-0", O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
// 设置从设备地址
if (ioctl(fd, I2C_SLAVE, I2C_ADDR) < 0) {
perror("ioctl");
exit(1);
}
// 读取寄存器值
buf[0] = REG_ADDR;
if (write(fd, buf, 1) != 1) {
perror("write");
exit(1);
}
if (read(fd, buf, 1) != 1) {
perror("read");
exit(1);
}
// 输出寄存器值
printf("Register value: %d\n", buf[0]);
// 关闭I2C设备文件
close(fd);
return 0;
}
```
以上代码演示了如何通过i2c-dev驱动程序在Linux中进行I2C通信。其中,文件描述符fd表示打开的I2C设备文件,通过ioctl函数设置从设备地址,通过write和read函数进行数据的读写。在实际使用中,需要根据具体的硬件设备和通信协议调整代码。