使用ESP32cam拍照并通过POST上传到远程服务器的例子程序
时间: 2023-12-29 13:06:07 浏览: 36
以下是使用ESP32cam拍照并通过POST上传到远程服务器的一个简单例子程序,供参考:
```c++
#include <WiFi.h>
#include "esp_camera.h"
#include "Base64.h"
#include <HTTPClient.h>
// WiFi网络信息
const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";
// 远程服务器信息
const char* serverUrl = "http://your_server_url/upload.php";
// 摄像头分辨率
#define CAMERA_WIDTH 640
#define CAMERA_HEIGHT 480
// 摄像头初始化
void initCamera() {
camera_config_t config;
config.ledc_channel = LEDC_CHANNEL_0; // LEDC输出通道
config.ledc_timer = LEDC_TIMER_0; // LEDC定时器
config.pin_d0 = 5; // 数据0引脚
config.pin_d1 = 18; // 数据1引脚
config.pin_d2 = 19; // 数据2引脚
config.pin_d3 = 21; // 数据3引脚
config.pin_d4 = 36; // 数据4引脚
config.pin_d5 = 39; // 数据5引脚
config.pin_d6 = 34; // 数据6引脚
config.pin_d7 = 35; // 数据7引脚
config.pin_xclk = 0; // XCLK引脚
config.pin_pclk = 22; // PCLK引脚
config.pin_vsync = 25; // VSYNC引脚
config.pin_href = 23; // HREF引脚
config.pin_sda = 26; // SDA引脚
config.pin_scl = 27; // SCL引脚
config.xclk_freq_hz = 20000000; // XCLK频率
config.pixel_format = PIXFORMAT_JPEG; // 像素格式
config.frame_size.width = CAMERA_WIDTH; // 帧宽度
config.frame_size.height = CAMERA_HEIGHT; // 帧高度
config.jpeg_quality = 10; // JPEG质量
config.fb_count = 1; // 帧缓存数量
esp_err_t err = esp_camera_init(&config);
if (err != ESP_OK) {
Serial.printf("Camera init failed with error 0x%x", err);
}
}
// 连接WiFi
void connectWiFi() {
Serial.printf("Connecting to %s ...", ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.print(".");
}
Serial.printf("WiFi connected, IP address: %s", WiFi.localIP().toString().c_str());
}
// 拍照并上传到远程服务器
void takePhotoAndUpload() {
// 拍照
camera_fb_t* fb = esp_camera_fb_get();
if (!fb) {
Serial.println("Camera capture failed");
return;
}
// 转换为Base64编码
String base64str = base64::encode(fb->buf, fb->len);
// 构建POST请求
HTTPClient http;
http.begin(serverUrl);
http.addHeader("Content-Type", "application/x-www-form-urlencoded");
// 将Base64编码的图片作为请求体发送
String requestBody = "image=" + base64str;
int httpResponseCode = http.POST(requestBody);
// 处理响应
if (httpResponseCode > 0) {
String response = http.getString();
Serial.printf("HTTP response code: %d, response: %s\n", httpResponseCode, response.c_str());
} else {
Serial.printf("HTTP request failed, error: %s\n", http.errorToString(httpResponseCode).c_str());
}
// 释放资源
http.end();
esp_camera_fb_return(fb);
}
void setup() {
Serial.begin(115200);
initCamera();
connectWiFi();
}
void loop() {
takePhotoAndUpload();
delay(5000);
}
```
在这个例子程序中,我们首先初始化了摄像头并连接了WiFi网络。然后在`loop()`函数中,我们调用`takePhotoAndUpload()`函数进行拍照并上传到远程服务器。在`takePhotoAndUpload()`函数中,我们调用`esp_camera_fb_get()`函数获取一帧摄像头数据,并将其转换为Base64编码的字符串。然后我们使用HTTPClient库构建POST请求,并将Base64编码的图片作为请求体发送到远程服务器上。最后我们处理远程服务器的响应,并释放资源。注意,我们在每次上传完图片后延迟了5秒钟,以免频繁上传占用过多的带宽和资源。