如何初始化SPI或I2C接口
时间: 2023-12-31 13:03:33 浏览: 58
SPI和I2C接口是常见的数字接口,它们可以用于连接各种外设如传感器、显示器和存储器等。
初始化SPI接口的步骤如下:
1. 配置SPI总线的时钟、数据位数和通信模式等参数;
2. 配置SPI接口的引脚,包括SCK、MOSI、MISO和CS等引脚;
3. 使能SPI接口,并设置为主设备或从设备模式;
4. 在主设备模式下,通过调用SPI发送函数发送数据;在从设备模式下,通过调用SPI接收函数接收数据。
以下是使用STM32F4系列MCU初始化SPI接口的示例代码:
```c
#include "stm32f4xx.h"
void SPI_Init(void)
{
SPI_InitTypeDef SPI_InitStruct;
// 使能SPI时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
// 配置SPI参数
SPI_StructInit(&SPI_InitStruct);
SPI_InitStruct.SPI_Mode = SPI_Mode_Master;
SPI_InitStruct.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStruct.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;
SPI_InitStruct.SPI_NSS = SPI_NSS_Soft;
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
SPI_Init(SPI1, &SPI_InitStruct);
// 配置SPI引脚
GPIO_InitTypeDef GPIO_InitStruct;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource5, GPIO_AF_SPI1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource6, GPIO_AF_SPI1);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource7, GPIO_AF_SPI1);
// 使能SPI
SPI_Cmd(SPI1, ENABLE);
}
```
初始化I2C接口的步骤如下:
1. 配置I2C总线的时钟和通信速率等参数;
2. 配置I2C接口的引脚,包括SCL和SDA等引脚;
3. 配置I2C从设备地址;
4. 使能I2C接口,并设置为主设备或从设备模式;
5. 在主设备模式下,通过调用I2C发送函数发送数据;在从设备模式下,通过调用I2C接收函数接收数据。
以下是使用STM32F4系列MCU初始化I2C接口的示例代码:
```c
#include "stm32f4xx.h"
void I2C_Init(void)
{
I2C_InitTypeDef I2C_InitStruct;
// 使能I2C时钟
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
// 配置I2C参数
I2C_StructInit(&I2C_InitStruct);
I2C_InitStruct.I2C_Mode = I2C_Mode_I2C;
I2C_InitStruct.I2C_DutyCycle = I2C_DutyCycle_2;
I2C_InitStruct.I2C_OwnAddress1 = 0x00;
I2C_InitStruct.I2C_Ack = I2C_Ack_Disable;
I2C_InitStruct.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
I2C_InitStruct.I2C_ClockSpeed = 100000;
I2C_Init(I2C1, &I2C_InitStruct);
// 配置I2C引脚
GPIO_InitTypeDef GPIO_InitStruct;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_OD;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource6, GPIO_AF_I2C1);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource7, GPIO_AF_I2C1);
// 使能I2C
I2C_Cmd(I2C1, ENABLE);
}
```
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)