Linux安装PXI板卡驱动

时间: 2023-11-30 17:18:00 浏览: 119

PLX PCI卡 linux驱动

PCI8系列 PCI9系列 PCI9054 linux驱动程序 PLX SDK Samples ================================================================ ABOUT This document provides a brief description of the samples included in the PLX SDK. Please refer to the source code in each sample & the PLX SDK User's Manual for additional details. The PLX samples are intended to demonstrate use of the PLX API. The samples are not intended for debug or real world applications, although they can be extended to complex applications. They should be treated as a reference for writing custom software that utilizes the PLX API. Not all samples work with all PLX devices. The PLX API supports numerous PLX chip families in PCI/PCIe, including 6000-series PCI-to-PCI bridges, 9000-series PCI-to-Local bus bridges, & 8000-series PCI/PCIe bridges & switches. Some samples are provided only for specific chip families. SAMPLES - ApiTest Simple application that calls various PLX APIs for a selected device & verifies return codes & parameters. The API calls made depend upon the type of device selected. - DSlave Demonstrates how to read/write from a PLX 9000 PCI BAR space using the PLX API/driver to perform the data transer. This operation is often referred to as "Direct Slave". - DSlave_BypassApi Similar to the 'DSlave' sample, except this sample uses the PLX API only to map a PCI BAR space directly to the application's virtual space. The application can then directly access the space via simple memory dereferencing, bypassing the PLX API/driver & resulting in greater performance, especially for small transfers. The application is responsible for initializing the BAR space, such as setup of translation/remap registers. - LocalToPciInt [9000-series & 8311] Demonstrates how to wait for a generic Local-to-PCI interrupt using the PLX Notification API. - NT_DmaTest [8000-series switches with DMA & NT support] Demonstrates using the DMA engine in a PLX 8000 switch to transfer data through a PLX 8000 NT port. - NT_DmaTest [8000-series switches with DMA & NT support] Demonstrates using the DMA engine in a PLX 8000 switch to transfer data through a PLX 8000 NT port. - NT_LinkTest [8000-series switches with NT support] Demonstrates NT communication by sending random sized data buffers through a PLX 8000 NT port. - NT_Sample [8000-series switches with NT support] Demonstrates very basic NT communication by sending keystrokes from one system through a PLX 8000 NT port & displaying them on the other system. - PerfMonitor [8000-series switches with Performance Counter support] Demonstrates use of the PLX Performance API to capture & display performance measurements from the chip. - PlxCm The PLX Command-Line Monitor useful for debugging. Complete source is provided. - PlxDma [9000 & 8000 series devices with DMA support] Demonstrates block & SGL DMA using the PLX DMA API. - PlxDmaPerf [8000-series devices with DMA support] Demonstrates continuous block DMA & calculates performance measurements. - PlxDmaSglNoApi [9000 & 8000-series devices with DMA support] Demonstrates DMA using manual setup of SGL descriptors. This is useful when an application has a list of specific DMA transfers to perform. - PlxEep A PLX command-line utility for reading/writing EEPROMs connected to PLX devices. Useful for production-line type environments. - PlxNotification Demonstrates use of the PLX Notification API to wait for interrupt events. - SampleAppGUI A very simple GUI provided only to demonstrate using the PLX API in a GUI app instead of a console type application. - SerdesEyeTest Code taken from the PLX PDE tool to show how to measure serdes eye data. This code is only sample source for reference purposes & not an actual running application. - Shared Some common functions shared by all sample application to perform tasks such as device selection, error display, etc.

好的，关于Linux安装PXI板卡驱动的问题，不同的PXI板卡需要不同的驱动程序。一般来说，你需要先找到你所使用的PXI板卡的型号和制造商，然后去他们的官方网站上下载对应的Linux驱动程序。在安装驱动程序之前，你需要确保你的系统已经安装了相应的依赖库和工具链，比如gcc和make等等。具体的操作步骤可以参考驱动程序提供的文档或官方的安装指南。希望能够帮到你！

阅读全文

Linux安装PXI板卡驱动

相关推荐

LINUX_PXE安装

PXI 动态 数字 io 模块 板卡 模式仪器 支持 麒麟 Linux系统

LabVIEWlabview调用PCI、PXI板卡采集数据.rar

基于FPGA的RS422通信PXI板卡设计.pdf

使用LabVIEW调用PCI/PXI板卡进行数据采集教程

pxi板卡pcb模板

labview调用PCI、PXI板卡采集数据.zip源码Labview个人项目资料程序资源下载

PXI系列板卡选型文件

Keysight_PXI_Digitizer_PPG：Keysight PXI Digitizer驱动程序，可与Labber一起使用并通过PPG触发

虚拟仪器PXI-6552板卡说明书

windriver--多种总线板卡驱动函数生成工具！

PXI系列板卡及调理模块选型指南

NI PXI平台驱动的旋转机械动态特性测试新方案

PXI总线驱动的虚拟航空仪表测试：智能与扩展特性

Windows下PCI/PXI设备驱动设计与实时图像采集系统应用

PCI/PXI总线驱动封装：提升应用程序的硬件访问效率

NI PXI 万用表 LabVIEW 驱动控件编程指南

PXI Express技术驱动高速混合信号测试系统革新

最新推荐

NI数据采集卡使用入门.docx

NI-VISA开发简介

【中国房地产业协会-2024研报】2024年第三季度房地产开发企业信用状况报告.pdf

JHU荣誉单变量微积分课程教案介绍

管理建模和仿真的文件

【实战篇：自定义损失函数】：构建独特损失函数解决特定问题，优化模型性能

如何在ZYNQMP平台上配置TUSB1210 USB接口芯片以实现Host模式，并确保与Linux内核的兼容性？

Naruto爱好者必备CLI测试应用

"互动学习：行动中的多样性与论文攻读经历"

【强化学习损失函数探索】：奖励函数与损失函数的深入联系及优化策略

PXI 动态数字 io 模块板卡模式仪器支持麒麟 Linux系统