c语言如何查看pcm文件数据长度
时间: 2024-02-03 07:15:12 浏览: 19
在C语言中,可以使用标准库中的fseek和ftell函数来查看PCM文件数据长度。
具体操作步骤如下:
1. 打开PCM文件,可以使用fopen函数打开文件,得到文件指针。
2. 使用fseek函数将文件指针定位到文件末尾。
3. 使用ftell函数获取文件指针当前位置,即文件长度。
4. 关闭文件,使用fclose函数关闭文件指针。
以下是示例代码:
```c
#include <stdio.h>
int main() {
FILE *pcmFile = fopen("test.pcm", "rb");
if (pcmFile == NULL) {
printf("Failed to open PCM file!\n");
return -1;
}
// 将文件指针定位到文件末尾
fseek(pcmFile, 0L, SEEK_END);
// 获取文件指针当前位置,即文件长度
long pcmLength = ftell(pcmFile);
printf("PCM file length: %ld bytes\n", pcmLength);
fclose(pcmFile);
return 0;
}
```
注意:在使用fseek函数时,第一个参数为文件指针,第二个参数为偏移量,第三个参数为定位方式。本例中使用了SEEK_END定位方式,表示从文件末尾开始偏移。
相关问题
基于FFTW库,实现c语言分析音频pcm数据的频率大小
要基于FFTW库实现C语言分析音频PCM数据的频率大小,可以按照以下步骤进行:
1. 首先,确保已经安装了FFTW库。你可以从FFTW的官方网站(http://www.fftw.org/)下载并安装库文件。
2. 在你的C程序中包含FFTW库的头文件:
```c
#include <fftw3.h>
```
3. 定义需要用到的变量,例如音频数据的长度、采样率等:
```c
int audioLength = ...; // 音频数据的长度
int sampleRate = ...; // 音频数据的采样率
```
4. 创建输入和输出数组,用于存储音频数据和频率大小的结果:
```c
fftw_complex *input = (fftw_complex*) fftw_malloc(sizeof(fftw_complex) * audioLength);
fftw_complex *output = (fftw_complex*) fftw_malloc(sizeof(fftw_complex) * audioLength);
```
5. 创建FFTW计划:
```c
fftw_plan plan = fftw_plan_dft_1d(audioLength, input, output, FFTW_FORWARD, FFTW_ESTIMATE);
```
6. 将音频数据填充到输入数组中:
```c
for (int i = 0; i < audioLength; i++) {
input[i][0] = audioData[i]; // 实部
input[i][1] = 0; // 虚部(置为0)
}
```
7. 执行FFT变换:
```c
fftw_execute(plan);
```
8. 计算频率大小:
```c
for (int i = 0; i < audioLength; i++) {
double frequency = (double)i * sampleRate / audioLength; // 计算频率
double magnitude = sqrt(output[i][0] * output[i][0] + output[i][1] * output[i][1]); // 计算幅度
// 在这里可以根据需要对频率大小进行处理或输出
}
```
9. 清理内存并销毁FFTW计划:
```c
fftw_destroy_plan(plan);
fftw_free(input);
fftw_free(output);
```
以上是一个基本的框架,你可以根据具体的需求进行进一步的处理和优化。希望对你有所帮助!
c语言pcm转wav
将 PCM 格式的音频文件转换为 WAV 格式,可以使用以下 C 语言代码:
```
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
typedef int16_t sample_t;
int main(int argc, char *argv[]) {
if (argc < 3) {
printf("Usage: pcm2wav <input file> <output file>\n");
return 1;
}
FILE *input_file = fopen(argv[1], "rb");
if (!input_file) {
printf("Failed to open input file: %s\n", argv[1]);
return 1;
}
FILE *output_file = fopen(argv[2], "wb");
if (!output_file) {
printf("Failed to open output file: %s\n", argv[2]);
fclose(input_file);
return 1;
}
// WAV 文件头
struct {
// RIFF 头
char riff_id[4]; // 固定为 "RIFF"
uint32_t riff_size; // 文件总长度 - 8
char wave_id[4]; // 固定为 "WAVE"
// fmt 子块
char fmt_id[4]; // 固定为 "fmt "
uint32_t fmt_size; // 固定为 16
uint16_t audio_format; // 编码格式,1 表示 PCM 格式
uint16_t num_channels; // 声道数,1 表示单声道,2 表示立体声
uint32_t sample_rate; // 采样率
uint32_t byte_rate; // 数据传输率,等于每秒采样数 × 每个样本的字节数
uint16_t block_align; // 每个采样块的字节数,等于每个样本的字节数 × 声道数
uint16_t bits_per_sample; // 每个样本的位数
// data 子块
char data_id[4]; // 固定为 "data"
uint32_t data_size; // 数据长度
} wav_header = {
.riff_id = "RIFF",
.wave_id = "WAVE",
.fmt_id = "fmt ",
.fmt_size = 16,
.audio_format = 1,
.num_channels = 1,
.sample_rate = 16000, // 假设采样率为 16000 Hz
.bits_per_sample = sizeof(sample_t) * 8,
.data_id = "data"
};
// 计算数据长度
fseek(input_file, 0, SEEK_END);
uint32_t data_size = ftell(input_file);
fseek(input_file, 0, SEEK_SET);
// 填写 WAV 文件头
wav_header.riff_size = 36 + data_size;
wav_header.byte_rate = wav_header.sample_rate * wav_header.num_channels * wav_header.bits_per_sample / 8;
wav_header.block_align = wav_header.num_channels * wav_header.bits_per_sample / 8;
wav_header.data_size = data_size;
// 写入 WAV 文件头
fwrite(&wav_header, sizeof(wav_header), 1, output_file);
// 复制数据
sample_t buffer[1024];
while (!feof(input_file)) {
size_t num_read = fread(buffer, sizeof(sample_t), sizeof(buffer) / sizeof(sample_t), input_file);
fwrite(buffer, sizeof(sample_t), num_read, output_file);
}
// 关闭文件
fclose(input_file);
fclose(output_file);
return 0;
}
```
你可以在命令行中使用以下命令来编译代码:
```
gcc pcm2wav.c -o pcm2wav
```
然后使用以下命令来将 PCM 文件转换为 WAV 文件:
```
./pcm2wav input.pcm output.wav
```
其中,`input.pcm` 是输入文件名,`output.wav` 是输出文件名。你需要将代码中的采样率、声道数等参数根据实际情况进行修改。