从管道读出数据,每次读 8 个字符,直到读出管道中的所有内容
时间: 2024-03-03 16:48:24 浏览: 29
可以使用如下的 C 语言代码从管道中读取数据:
```c
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
int main() {
int fd = open("mypipe", O_RDONLY); // 打开管道
char buf[9]; // 用于存储每次读取的数据
int n = 0; // 用于记录每次读取的字节数
while ((n = read(fd, buf, 8)) > 0) { // 读取数据直到管道中没有数据
buf[n] = '\0'; // 在读取的数据末尾添加 '\0',使其成为 C 语言的字符串
printf("%s", buf); // 打印读取的数据
}
close(fd); // 关闭管道
return 0;
}
```
其中,`open` 函数用于打开管道,`read` 函数用于从管道中读取数据,`close` 函数用于关闭管道。这段代码每次最多读取 8 个字符,直到读取完整个管道中的数据。
相关问题
编程实现 a) 调用 pipe()创建无名管道 b) 调用 fork 创建一个子进程 c) 子进程 - 用 signal( )安装信号 SIGALRM 在 SIGALRM 的信号处理函数内执行下列操作: 打印出 pid 和接收到的信号值 向管道内写入所有的小写字母,打印出进程号及成功写入的字节数 - 用 signal( )安装信号 SIGINT 在 SIGINT 的信号处理函数内执行下列操作: 打印出 pid 和接收到的信号值 重新安装信号 SIGINT,采用默认方式处理该信号 - 设置一个定时器,2s 后产生 SIGALRM 信号 - 进入 while(1)循环,每隔 1s 打印出一行” ...child is waiting” d) 父进程 - 打印出进程号 - 从管道读出数据,每次读 8 个字符,直到读出管道中的所有内容 打印出每次读出的字节数及读出的内容 - 向子进程发送信号 SIGINT - 等待 1s - 再次向子进程发送信号 SIGINT - 等待子进程结束 - 父进程退出
可以参考下面的代码实现:
```c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <sys/wait.h>
void sigint_handler(int sig) {
printf("PID %d received signal SIGINT(%d)\n", getpid(), sig);
signal(SIGINT, SIG_DFL); // 恢复默认信号处理方式
}
void sigalrm_handler(int sig) {
printf("PID %d received signal SIGALRM(%d)\n", getpid(), sig);
char buf[26] = "abcdefghijklmnopqrstuvwxyz\n";
int fd[2];
pipe(fd);
pid_t pid = fork();
if (pid < 0) {
perror("fork error");
exit(-1);
} else if (pid == 0) { // 子进程
close(fd[0]); // 关闭读端
printf("Child process %d is writing to pipe...\n", getpid());
int n = write(fd[1], buf, sizeof(buf));
printf("Child process %d wrote %d bytes to pipe\n", getpid(), n);
close(fd[1]);
exit(0);
} else { // 父进程
close(fd[1]); // 关闭写端
char buf[8];
int n;
printf("Parent process %d is reading from pipe...\n", getpid());
while ((n = read(fd[0], buf, sizeof(buf))) > 0) {
printf("Parent process %d read %d bytes: %.*s", getpid(), n, n, buf);
}
close(fd[0]);
kill(pid, SIGINT); // 发送 SIGINT 信号给子进程
sleep(1);
kill(pid, SIGINT); // 再次发送 SIGINT 信号给子进程
waitpid(pid, NULL, 0); // 等待子进程结束
printf("Parent process %d exited.\n", getpid());
exit(0);
}
}
int main() {
signal(SIGINT, sigint_handler);
signal(SIGALRM, sigalrm_handler);
printf("Parent process %d started.\n", getpid());
alarm(2); // 设置定时器,2s 后产生 SIGALRM 信号
while (1) {
printf("...child is waiting\n");
sleep(1); // 每隔 1s 打印一次
}
return 0;
}
```
注意事项:
1. 父进程和子进程都需要关闭管道的读写端,即使它们不需要用到。
2. 在子进程中,我们使用 `write()` 函数向管道中写入小写字母,然后关闭写端,这样父进程在读取数据时就能正确判断管道的结束位置。
3. 在父进程中,我们使用 `read()` 函数从管道中读取数据,每次读取 8 个字符,直到读到了管道的结束位置,也就是读取返回值为 0。
4. 在父进程中,我们使用 `kill()` 函数向子进程发送信号,等待子进程结束时使用 `waitpid()` 函数等待子进程结束。
C语言编程实现 a) 调用pipe()创建无名管道 b) 调用fork创建一个子进程 c) 子进程 -用signal( )安装信号SIGALRM 在SIGALRM的信号处理函数内执行下列操作: 打印出pid 和接收到的信号值 向管道内写入所有的小写字母,打印出进程号及成功写入的字节数 -用signal( )安装信号SIGINT 在SIGINT的信号处理函数内执行下列操作: 打印出pid 和接收到的信号值 重新安装信号SIGINT,采用默认方式处理该信号 -设置一个定时器,2s后产生SIGALRM信号 -进入while(1)循环,每隔1s打印出一行” …child is waiting" d)父进程 -打印出进程号 -从管道读出数据,每次读8个字符,直到读出管道中的所有内容打印出每次读出的字节数及读出的内容 -向子进程发送信号SIGINT -等待1s -再次向子进程发送信号SIGINT -等待子进程结束 -父进程退出
好的,您想问的是如何使用 C 语言编写一个程序,实现创建无名管道、fork 子进程、设置信号处理函数、定时器、进程间通信、发送信号等功能,具体步骤如下:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/wait.h>
#include <signal.h>
#include <ctype.h>
#define BUF_SIZE 1024
void sig_alrm_handler(int signo);
void sig_int_handler(int signo);
int main() {
pid_t pid;
int pipefd[2];
char buf[BUF_SIZE];
int n, count = 0;
if (pipe(pipefd) < 0) {
perror("pipe error");
exit(1);
}
if ((pid = fork()) < 0) {
perror("fork error");
exit(1);
} else if (pid == 0) { // 子进程
close(pipefd[0]); // 关闭读端
// 安装 SIGALRM 信号处理函数
if (signal(SIGALRM, sig_alrm_handler) == SIG_ERR) {
perror("signal error");
exit(1);
}
// 设置定时器
alarm(2);
while (1) {
printf("... child is waiting\n");
sleep(1);
}
} else { // 父进程
close(pipefd[1]); // 关闭写端
// 从管道中读取数据
while ((n = read(pipefd[0], buf, BUF_SIZE)) > 0) {
for (int i = 0; i < n; i++) {
printf("%c", buf[i]);
if (islower(buf[i])) {
count++;
}
}
}
printf("\n%d lowercase letters are read from child\n", count);
// 发送 SIGINT 信号给子进程
if (kill(pid, SIGINT) < 0) {
perror("kill error");
exit(1);
}
// 等待 1 秒
sleep(1);
// 再次发送 SIGINT 信号给子进程
if (kill(pid, SIGINT) < 0) {
perror("kill error");
exit(1);
}
// 等待子进程结束
if (waitpid(pid, NULL, 0) < 0) {
perror("waitpid error");
exit(1);
}
}
return 0;
}
void sig_alrm_handler(int signo) {
printf("pid %d received signal %d\n", getpid(), signo);
char buf[26];
for (int i = 0; i < 26; i++) {
buf[i] = 'a' + i;
}
// 写入数据到管道
int n = write(pipefd[1], buf, 26);
printf("pid %d wrote %d bytes to pipe\n", getpid(), n);
// 重新设置定时器
alarm(2);
}
void sig_int_handler(int signo) {
printf("pid %d received signal %d\n", getpid(), signo);
// 恢复 SIGINT 的默认处理方式
if (signal(SIGINT, SIG_DFL) == SIG_ERR) {
perror("signal error");
exit(1);
}
}
```
这个程序的主要思路是:创建无名管道,fork 子进程,子进程设置定时器和 SIGALRM 信号处理函数,父进程从管道中读取数据,并向子进程发送 SIGINT 信号。具体实现细节请参考代码注释。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)